List of 2022 Matryx 850 Mods/Fixes

[mrooks17]

Hey everyone,
I just picked up a 22’ Khaos Slash 850 with 150 miles. Has a 4yr warranty and is all stock.

I’ve been reading through the forums on recalls/issues/etc. The sled has had the stuck throttle issue taken care of. Has not had the fuel pump filter issue fixed. Are there any other little mods that everyone is finding need done?
Ex. The force turbo TSS bypass to help with idle and plug issues? Thanks for any feedback/input

 

[TRS]

A TKI throttle block. The stock one doesn’t get full throttle when free play is set up correctly

 

[Kylep]

A TKI throttle block. The stock one doesn’t get full throttle when free play is set up correctly

What about an mvm one?

 

[mrooks17]

Polaris plastic tether holding up?

 

[Sheetmetalfab]

What about an mvm one?

Mvm one is good.

 

[Sheetmetalfab]

Polaris plastic tether holding up?

I have not had any issues.

 

[TRS]

What about an mvm one?

I have only used the TKI block. Any aftermarket T block that has enough throw will work just fine.

 

[madmax]

A TKI throttle block. The stock one doesn’t get full throttle when free play is set up correctly

Hmm, I’ll have to look into this.

The most obvious mod is the TRS clutching and alignment!

 

[mrooks17]

Hmm, I’ll have to look into this.

The most obvious mod is the TRS clutching and alignment!

Is there a TRS website? I’ve read a lot of people talking about this company and owners (Tony?). But I can’t find a website with product offering/info.

 

[TRS]

Is there a TRS website? I’ve read a lot of people talking about this company and owners (Tony?). But I can’t find a website with product offering/info.

I don’t have a website.
You can PM me here or e-mail me.
Thanks.

 

[PSI 800]

If you play in lots of deep powdery snow you might want to put some window screen mesh over the vents in the side panels and hood. somewhere there is a thread about all the things that people have done

 

[Pickin’ Boogers]

 

[damx]

What is that for ?

 

[gtwitch]

I dont know what it is also, maybe Tony will chime in here
gtwitch in Wyoming

 

[richracer1]

That's the widget plate that fits on the maniform.

 

[Sheetmetalfab]

That's the widget plate that fits on the maniform.

Absolute game changer when dangling gnarville…….

 

[PSI 800]

HUH?

 

[Sheetmetalfab]

HUH?

Satire.

 

[mrooks17]

Looks hawt

 

[TRS]

The weak running board, footrest support. I have replacements with me at all times.
It doesn’t take a lot of force to snap them.
There will be a fix for that in the near future. Tom at TKI is the guy to call.