Yamaha RX-1 shaft absorber replacement.

[piotrek]

Hi! My name is Piotr. I`m from Poland. In snowmobile rx1 2004 must replacement absorber 8FP-16155-00-00 in shaft 8FA-11406-00-00. I removed the engine. I removed oil pan, oil pump, water pump and this shaft. I do not know how to dismount the sleeve and the bearing. Was someone from you replacing the absorber? The service manual does not show this procedure. How to do it?

Best regards
Piotr

 

[Givemeaboost]

By looking at the Yamaha part fisch it looks like you might need to use a split puller that will go behind the bearing and press it off the shaft.


Ken............

 

[piotrek]

I did it, I needed a split puller and high temperature.