Worn holes in Skids , front tunnel mount and A arm in 700 firecat 144"

[Hjalti_GTO]

What is the best way to fix this ?

https://ibb.co/iPvQWL
https://ibb.co/ni0sBL
https://ibb.co/iUP8kf
https://ibb.co/mh75WL

 

[Idcatman3]

For the rails, I've seen them welded and re-drilled, and that works for a while, but doesn't last forever. Probably best to replace if you can.

You can rivet on a backing plate for the tunnel mounts.

I don't have any real good ideas for the A-Arms.