Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

What's the longest track any one has put on a edge

I have an 03 vertical edge 800 151 with a 162 track under it. (uses 159 rails, drop& roll and big wheels at the rear) I am not really sure if the drop&roll is required but it was done to the sled before i owned it.



8ddd333239d2382ac72242d48b3274f1.jpg


6e412b37f9d9e627cc3bf59fd79b2d60.jpg
 
Last edited:
I ran the 900 RMKs 166 on my 910 Edge for a couple of years. I used the Holz drop kit for the chaincase.

sled_guy
 
166" Edge

I run a 166" on a 162"mountain cat skid with an HRP drop and roll and extrovert drivers works well!

IMAG0121.jpg
 
If you want better traction then you go with a camoplast extreme that is for Arctic Cats. It is 3 lugs across and has bends in the lugs to better contain the snow. It has about 30% more pulling traction than a Series 4. Going with a longer Series 4 would be a giant mistake, IMO.
 
Another 166 here. Pro skid 163 mounted to a power addiction tunnel and had to do math to get the location right to edge specs. Ice age rails and 9" CE components wheels, Drop and roll with a cmx drive and eight tooth avids


Not sure what I did here? Same 166 track but I think I used a hloz kit on 159 Polaris rails then a 10" wheel set from ratsled mounted reverse to take a little more slack
 
Last edited:
Does anyone have or know where I can find a drop n roll for an edge chassis? Holz would be great. Thanks,Jay
 
I have a drop n roll chain case I'll part with. New never installed.
 
Would it be possible to see a pic? How does it fit? Bolt up the same to the bulkhead and then it's how much longer?
 
Premium Features



Back
Top