Need jetting & clutching setup, 8-10k, MM600 triple

[snowx99]

Bringing '00 MM600 to Togwotee area in early March. Need basic recommendations for jetting and clutching.

Sled is basically stock with camo 144x2 and a lightweight can on it.

 

[thinksnow]

Look in your manual. It should all be there and you can even drop down one or two sizes in jets. The stock recomendations leave the sled quite rich for Yamaha's safety.

Maybe someone will have the exact setup, but I always used the charts and went from that point.

 

[shortman]

jetting

120 main jets, 1.75 turns out on the air screw and i will have to look at the clutching cant remember the weights or spring combination for sure.

 

[snowx99]

Owners manual doesn't have jack in it for recommendations. Besides, manufacturer specs seldom work well anyway.

Just trying to get the sled reasonably close for my brother.

 

[snowx99]

Shortman- thanks for the jetting info, let me know if you're able to dig up clutching info too.