Need a custom choke cable for my build. Where can I obtain such a thing? FBF???

[SnoDmon]

I have put some Lectron carbs on my sled and apparantly the push/pull chokes are a bunch of garbage or PAR pawned some old carbs off on me that were sittin on the shelf. Anyways, the chokes won't stay up on em and it's a pain in the @$$ to pop the hood and have a buddy hold em every time I have to start it cold. Guess the rubber boots wear out after the first use. So I see that you can get a cable choke setup and was going to order some but what would I use for a cable? I have an '09 IQr and the stock mikuni's were rack carbs so they only ran a single cable. I would like to hook it up to the connection on the back of my choke lever. Is FatBoyFrenchy still around? I remember you made the cables for the 900 RMK's and they were great. Can you build me one? It would need a connector, splitter, and two choke cable ends. Unless I can get one I can install in the factory location with the choke lever on it. Please help guys. Thanx,

 

[LoudHandle]

Pics and dimensions of the Lectron end connection? How long are you needing? Good possibility a stock choke cable from the pre-rack era would work. Just need more info as I've never even seen a Lectron carb or their choke system.

 

[rdr99]

Maybe just install a primer like the Doos used to have?

 

[SnoDmon]

LoudHandle,
I don't have any to measure. I found some pics by google'ing lectron fuel systems and clicking on the parts link. First page shows cable choke assemblies. Looked like standard bore.

 

[05900]

http://www.lokar.com/index.html spendy but they have saved me....
http://www.lectronfuelsystems.com/products/parts-1.html they gotta have something.
http://www.lectronfuelsystems.com/products/dual_throttle_cable.html make it work ?
http://www.fastbygast.com/index.htm maybe these guys know?
Parts bin at local bike/atv shop or salvage yard? Gotta be some twin carb set up you can steal...