Garage/summer clearance sale
*all parts listed are new unless otherwise noted!!
*good deals for you….more room in the shop for us!
*Polaris '09 155 RMK skidframe with Ryde f/x shocks. Complete and brand new! $700.00*******SOLD****
*Polaris '09 155 RMK track new take off-zero miles. $500.00******SOLD*****
*Polaris '09 RMK a-arms(all four) all new-zero miles $400.00 set
*Polaris '09 RMK front shocks-Ryde f/x with springs-new-zero miles $250.00 pair
*Polaris '09 155 RMK hood with headlight assy/decals-black-new-zero miles $675.00
*good used timbersled bark buster apex front end kit with works shocks and slp powderpro ski's(blue a-arms,black spindles,black ski's w/blue loops)$900.00
*UBR/Polaris billet 900 motor*NEW AND COMPLETE COMPLETE COMPLETE!all new crank,case,cylinders,pistons,head etc. comes with bored carbs,reeds,new pipes,programmed cdi,stator/pump and housing,recoil...you would need to supply very little to run this motor!(some externals are used)
$3600.00!!! deal of the century!******SOLD*****
*new v-force 3 reed set for polaris '06-'08 carbed 600 HO motor *no gaskets!! wps part #59-4512 $210.00 set ***sold**
*nice used v-force 2 reed set for polaris '05-'06 700/900 rmk/fusion *no gaskets!! same app. as wps #59-4511 $130.00 set
*new v-force 3 reed set for polaris 6/7/800 HO CFI new style with reed stoppers wps#59-4513 $230.00 set
*new v-force 3 reed set for all polaris snow triples wps #59-4515 $270.00 set
*CPC 48mm carburetors(2) with polaris flanges (pre HO/CFI) brand new $700.00 set
*polaris chassis assembly.gen 2 bulkhead and ftx 159 tunnel with +2” conversion, double pass u-cooler,ftx lightweight trailing arms ,swedged radius and tie rods-no heims-(your choice of width),footrests,ftx chromoly pyramid steering hoop,your choice of a twin or triple motor plate. Bulkhead and hoop are powdercoated black,tunnel is natural aluminum. Drop and roll set up for edge chain case(not included). $2300.00****make an offer***ready for a big motor!
*2001 stock mountain max hood with sport tech windshield/guages/headlight and hood harness-no cracks $400.00
*ftx gen 2 polaris triple motor plates $125.00 ea
*ftx gen 2 polaris twin motor plates $100.00 ea
*141 fast m-10 rails $300.00 pr
*cr racing 174 m-10 rails-1 pair only! $925.00 pr*********SOLD******
*ftx m-series composite mod hoods(minor blems)-black $240.00 ea***only one left!***
*ftx m-10 dual rate titanium spring kits $880.00 ea***sold out***
*ftx gen 2 polaris chromoly “pyramid” steering hoops $40.00 ea***sold out***
*turbonetics 0-10 psi boost controllers $15.00 ea
*ftx lightweight trailing arms for polaris edge chassis-no powder coat! Can polish or
powdercoat for additional charge. $380.00 pr
*team tss98 helix’s used for testing: 54/42-54/40 .46 er---strt 38-strt 42 er
58/44-58/42 .46 er $45.00 ea
*slp hard coated “logical” helix’s for polaris button secondary- 50/34 $50.00 ea
*ftx custom straight rails for polaris 155 iq rmk-anodized black w/engraved logo $390.00 pr***sold out***
*slp m8/m1000 intake kits p/n#14-299 $40.00 ea***sold out***
*slp polaris cfi big mouth intake kits p/n#14-123 $32.00 ea***only one left!!***sold out***
*p-85 primary clutch set up by hartmans for yamaha crankshaft and modified for heel
clicker weights. Sheaves have been banged up . 600 miles. $190.00 ea
*ubr yamaha 944cc billet cylinder big bores assembled on your bottom end(sx-m-max 700) $2500.00 ea***ONLY ONE LEFT!***
*ftx fantom efi fuel controllers for all polaris cfi motors including 900’s $320.00 ea
*team lightweight secondary clutch for yamaha splined shaft(blue) includes helix
(54/42-54/40 .46) 200 miles $210.00 ea
*ftx/wilwood billet dual piston brake calipers anodized black 3.75” mounting centers $110.00 ea
*take out jackshaft and driveshaft for ’07 up yamaha phazers 150 miles $50.00 ea
*assembled ubr billet 900 polaris motor.used case, top end and crank all completely new .$3100.00 ea***new price!
no ignition or externals other than exhaust flanges. Can supply the rest for additional charge. Includes boring your carburetors and reprogramming your cdi.***********************SOLD**********************
*ubr billet 1150cc arctic cat big bores assembled on your bottom end. Includes boring your
carburetors. $4100.00 ea
*ubr billet rotax rotary valve covers, misc. Colors and flange angles $40.00 ea
*diamond-s- yamaha nytro mesh hood with tank console . Black. $260.00 ea***sold**
*polaris iq rmk headlight assembly. 500 miles. Includes all bulbs. $100.00 ea
*polaris 800 dragon airbox assy. 500 miles. $40.00 ea
*800 dragon modified stock head. Narrowed squish band,chambered for 14.0:1 compression
300 miles-includes cover $110.00 ea
*3 new ubr 1030 billet cylinders for polaris ultra/xcr bottom end.sleeved but need bored ******SOLD*****
and ported. $1300.00 set
*yamaha rx-1 carburetor assembly.complete and low miles $250.00 set
*polaris gen 2 headlight housings with high beam bulbs-new! $30.00 ea
*polaris gen 1 indy upper and lower headlight housing-new! $30.00 set
*crank shop twin pipes for ’03-’04 rev 800. Race pipes with side exiting silencers $490.00 set
*crank shop twin pipes for ’03-’04 rev big bore 860-995cc $490.00 set
*crank shop twin pipes for polaris ’05 up iq chassis. 600-730cc big bore. $550.00 set
*crank shop twin pipes for polaris 900 fusion chassis $450.00 set
*slp pipe stampings non ves polaris 7/800 twin $100.00 ea
*arctic cat 1m mountain cat seats, 1 red and 1 silver used in good shape $40.00 ea
*early arctic cat m-series seat green/black used in good shape $40.00 ea
feel free to call, e-mail or p.m. With questions or if you are looking for
something not listed…you never know what we have laying around!
*happy to supply pics by e-mail!
*all parts listed are new unless otherwise noted!!
*good deals for you….more room in the shop for us!
*Polaris '09 155 RMK skidframe with Ryde f/x shocks. Complete and brand new! $700.00*******SOLD****
*Polaris '09 155 RMK track new take off-zero miles. $500.00******SOLD*****
*Polaris '09 RMK a-arms(all four) all new-zero miles $400.00 set
*Polaris '09 RMK front shocks-Ryde f/x with springs-new-zero miles $250.00 pair
*Polaris '09 155 RMK hood with headlight assy/decals-black-new-zero miles $675.00
*good used timbersled bark buster apex front end kit with works shocks and slp powderpro ski's(blue a-arms,black spindles,black ski's w/blue loops)$900.00
*UBR/Polaris billet 900 motor*NEW AND COMPLETE COMPLETE COMPLETE!all new crank,case,cylinders,pistons,head etc. comes with bored carbs,reeds,new pipes,programmed cdi,stator/pump and housing,recoil...you would need to supply very little to run this motor!(some externals are used)
$3600.00!!! deal of the century!******SOLD*****
*new v-force 3 reed set for polaris '06-'08 carbed 600 HO motor *no gaskets!! wps part #59-4512 $210.00 set ***sold**
*nice used v-force 2 reed set for polaris '05-'06 700/900 rmk/fusion *no gaskets!! same app. as wps #59-4511 $130.00 set
*new v-force 3 reed set for polaris 6/7/800 HO CFI new style with reed stoppers wps#59-4513 $230.00 set
*new v-force 3 reed set for all polaris snow triples wps #59-4515 $270.00 set
*CPC 48mm carburetors(2) with polaris flanges (pre HO/CFI) brand new $700.00 set
*polaris chassis assembly.gen 2 bulkhead and ftx 159 tunnel with +2” conversion, double pass u-cooler,ftx lightweight trailing arms ,swedged radius and tie rods-no heims-(your choice of width),footrests,ftx chromoly pyramid steering hoop,your choice of a twin or triple motor plate. Bulkhead and hoop are powdercoated black,tunnel is natural aluminum. Drop and roll set up for edge chain case(not included). $2300.00****make an offer***ready for a big motor!
*2001 stock mountain max hood with sport tech windshield/guages/headlight and hood harness-no cracks $400.00
*ftx gen 2 polaris triple motor plates $125.00 ea
*ftx gen 2 polaris twin motor plates $100.00 ea
*141 fast m-10 rails $300.00 pr
*cr racing 174 m-10 rails-1 pair only! $925.00 pr*********SOLD******
*ftx m-series composite mod hoods(minor blems)-black $240.00 ea***only one left!***
*ftx m-10 dual rate titanium spring kits $880.00 ea***sold out***
*ftx gen 2 polaris chromoly “pyramid” steering hoops $40.00 ea***sold out***
*turbonetics 0-10 psi boost controllers $15.00 ea
*ftx lightweight trailing arms for polaris edge chassis-no powder coat! Can polish or
powdercoat for additional charge. $380.00 pr
*team tss98 helix’s used for testing: 54/42-54/40 .46 er---strt 38-strt 42 er
58/44-58/42 .46 er $45.00 ea
*slp hard coated “logical” helix’s for polaris button secondary- 50/34 $50.00 ea
*ftx custom straight rails for polaris 155 iq rmk-anodized black w/engraved logo $390.00 pr***sold out***
*slp m8/m1000 intake kits p/n#14-299 $40.00 ea***sold out***
*slp polaris cfi big mouth intake kits p/n#14-123 $32.00 ea***only one left!!***sold out***
*p-85 primary clutch set up by hartmans for yamaha crankshaft and modified for heel
clicker weights. Sheaves have been banged up . 600 miles. $190.00 ea
*ubr yamaha 944cc billet cylinder big bores assembled on your bottom end(sx-m-max 700) $2500.00 ea***ONLY ONE LEFT!***
*ftx fantom efi fuel controllers for all polaris cfi motors including 900’s $320.00 ea
*team lightweight secondary clutch for yamaha splined shaft(blue) includes helix
(54/42-54/40 .46) 200 miles $210.00 ea
*ftx/wilwood billet dual piston brake calipers anodized black 3.75” mounting centers $110.00 ea
*take out jackshaft and driveshaft for ’07 up yamaha phazers 150 miles $50.00 ea
*assembled ubr billet 900 polaris motor.used case, top end and crank all completely new .$3100.00 ea***new price!
no ignition or externals other than exhaust flanges. Can supply the rest for additional charge. Includes boring your carburetors and reprogramming your cdi.***********************SOLD**********************
*ubr billet 1150cc arctic cat big bores assembled on your bottom end. Includes boring your
carburetors. $4100.00 ea
*ubr billet rotax rotary valve covers, misc. Colors and flange angles $40.00 ea
*diamond-s- yamaha nytro mesh hood with tank console . Black. $260.00 ea***sold**
*polaris iq rmk headlight assembly. 500 miles. Includes all bulbs. $100.00 ea
*polaris 800 dragon airbox assy. 500 miles. $40.00 ea
*800 dragon modified stock head. Narrowed squish band,chambered for 14.0:1 compression
300 miles-includes cover $110.00 ea
*3 new ubr 1030 billet cylinders for polaris ultra/xcr bottom end.sleeved but need bored ******SOLD*****
and ported. $1300.00 set
*yamaha rx-1 carburetor assembly.complete and low miles $250.00 set
*polaris gen 2 headlight housings with high beam bulbs-new! $30.00 ea
*polaris gen 1 indy upper and lower headlight housing-new! $30.00 set
*crank shop twin pipes for ’03-’04 rev 800. Race pipes with side exiting silencers $490.00 set
*crank shop twin pipes for ’03-’04 rev big bore 860-995cc $490.00 set
*crank shop twin pipes for polaris ’05 up iq chassis. 600-730cc big bore. $550.00 set
*crank shop twin pipes for polaris 900 fusion chassis $450.00 set
*slp pipe stampings non ves polaris 7/800 twin $100.00 ea
*arctic cat 1m mountain cat seats, 1 red and 1 silver used in good shape $40.00 ea
*early arctic cat m-series seat green/black used in good shape $40.00 ea
feel free to call, e-mail or p.m. With questions or if you are looking for
something not listed…you never know what we have laying around!
*happy to supply pics by e-mail!
Last edited:
