S
Hi im new here i have a 2000 polaris 500 xc sp and im doing a sprocket change to 19/43 im just wondering what size chain do i run?
Chaincase reduild
- Thread starter sledder2000
- Start date
Check the reduild manual. ?
Not sure what chassis that is; if it's EDGE, you'll need a 74t chain. If the ratio is what you're looking for, that's a great combination on EDGE sleds: very little dogleg. The spacing between the driveshaft and jackshaft on those is 7.92," so you can tell what you've got by measuring between those (just make sure you're going centerline to centerline). I'm seeing two other spacings listed in the manual I have: 6.625" and 7.05." I'm guessing those are for the old Indy chassis and Gen II, respectively, but not sure. Either way, they call for a 68t (6.625 spacing) or 70t (7.05 spacing).
