Thanks for the replies.
My motor is stock other than the turbo.
Like the XIC the boondocker box is really only there for adding fuel under boost. At least as far as boondocker is concerned because they never recomended running anything but zeros in the off boost section.
It runs terrible like that.
On the xic and some other controllers there is a map sensor that will read vaccum? The boondocker box uses a pressure transducer so it won't?
Which must have an effect on the ability to tune when boost fuel is added.
So if it likes to be richened up or leaned out as it approaches zero. We can tune that on the XIC. And it's independent of throttle position and rpm?
Xpturbo600 you say the XIC is very capable if you spend the time and money. Does that mean it may take dyno time to tune because of the complexity?
The elevation tuning on the XIC all has to be tuned?
Or is there a map in it that chsnges it a certain % every so many feet?
Or am I simply getting the box to save a fuel number so next time I'm at 6000 feet again it uses that number I tuned last time.
Anyone know about boondocker Super tuner stuff on the Dragon box?
Like ABCDEF modes.
On a Arctic cat one of those changed how boost fuel is added.
What ever thst means exactly.
I don't have a manual handy but it would be useful to check out the xic manual to get an idea on its features.
Elevation trim is numbers or a percentage of overall fuel I believe, it's every 1000 feet I believe, so you can help trim the overall fuel in each elevation bracket.
The boost/pressure sensor will read vacuum, you can indeed choose when it'll start to kick in as far as how much vacuum / boost.
It has the main fuel adjustment then you can tweak approx every 500 rpm from 3000 rpm I believe? Up to like 12000, so for each range you can add or pull some fuel. I find the box works great. Again it's only for external injectors, some boondocker kits utilized the stock injectors so it also tweak the n/a fueling I believe.
Overall i put one on my yamaha apex from an mcx and tuned it from the ground up, ran really good, took me. About a half hour or so then after that it was the fine tweaks but pretty user friendly box.