Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

2018 800 pro rmk bogging

I have a 2018 800 rmk pro 1200 miles this season it has started to miss/bog. i can accelerate to 7000 rpm before it will miss, or in powder on a climb hard throttle it will miss---had a dealer change injectors,checked fuel pressure still has problem, compression is good new plugs, belt adjusted correct- am now thinking exaust valves--any comments thanks
 
fraid cable EV valves any codes? Just for kicks check ground bolt on bulk head. Loosen and retighten. Those are good machines hope you find it
 
My 2018 had a stator issue that made it do strange "bogging" things.

Never threw codes, and was quite a challenge for the dealer to diagnose. Once replaced, it ran like a beast again!

Might be worth running that by the dealer.
 
I have a 2018 800 rmk pro 1200 miles this season it has started to miss/bog. i can accelerate to 7000 rpm before it will miss, or in powder on a climb hard throttle it will miss---had a dealer change injectors,checked fuel pressure still has problem, compression is good new plugs, belt adjusted correct- am now thinking exaust valves--any comments thanks
Did you ever figure out what caused the bog / missfire my 2018 rmk 800 is doing 5he same thing
 
Replaced the fuel pump my self--no change-took it to a dealer who ran diagnostics said it was voltage regulator replaced it,I took it to the mountains -same problem it would cut out on a hard hill climb bogging between 7 and 8000. took it back they said it was the stator- replaced that-back to the mountain-no change-back to the dealer they said it was the computer-I told them to forget it! took my sled back- went to a recycler and tried a computer with a 30 day return policy. back to the mountain-no change still cutting out, returned computer. I completely unhooked all fuel lines from the fuel pump to the injectors and found one o-ring by the injectors that was not seating properly -repaired -back to the mountains -problem solved. I believe air was bleeding in which caused a vacume in the line, starving the machine under full load. If you Have similar problems start at the fuel system and maybe you'll save the cash and head-ache I went thru
 
Premium Features



Back
Top