I have a 2009 M1000 Sno Pro with over 500 miles and the last couple of rides it has just died on me (once per ride). It has been after a hard pull on a hill and it acts just like I hit the kill switch, but that is not the case. I immediately pulled on the rope to make sure I didn't seize the motor and it pulls over just fine. I also through snow on the motor to see just how hot it was getting, and everything seemed just fine. There are no codes on the display either. It starts right back up, but it does run a little boggy for a while but then it cleans out and seems to be ok. Any suggests would be greatly appreciated. Thanks! :face-icon-small-fro