we have 2 2009 m8 (non ho motors), both suffered from the egging of the filler cap. swapped both to rk tek's cap, and danos insert. the wifes sled melted the gauge/sender area so bad, the sender wont fit back in. had heat tape, and pipe wrap around the sender to prevent this, and it still melted (albeit 9 years of riding). it definitely needs a new tank now.
I did the searches but, came up empty. how hard is it to swap the tanks for a new one?
with the updated 2010-11 hood, shields, covers, sender, and tank... can you upgrade the 2008-09 to the newer 10-11 stuff?
seems the 10-11 tank, sender is cheaper than the older model. wondering if the sender harness from the 09 would plug into the 10-11 sender?
was planning on more heat tape, and the shield on the hood that comes on the 10-11 m's.
help is appreciated. if someone has a link to a install video, I would be grateful. Ski
I did the searches but, came up empty. how hard is it to swap the tanks for a new one?
with the updated 2010-11 hood, shields, covers, sender, and tank... can you upgrade the 2008-09 to the newer 10-11 stuff?
seems the 10-11 tank, sender is cheaper than the older model. wondering if the sender harness from the 09 would plug into the 10-11 sender?
was planning on more heat tape, and the shield on the hood that comes on the 10-11 m's.
help is appreciated. if someone has a link to a install video, I would be grateful. Ski