Barcode Performance. Secret testing grounds new a-arms

We were out last weekend at our secret testing grounds for the last of our season. It was crazy some spots in the shade still had waste deep snow!!!
We have been working on Viper/Proclimb a-arms.(And Skidoo XM) They will be the same configuration as our Nytro ones, 36" wide and +5" forward 365. They will use stock tie rods and the stock shocks from any of the 38" wide front end sleds. As of right now we don't see the need for a 425 kit. As the Viper handles pretty sweet on the trail in stock form.

That being said we have completely revamped our Nytro 365 kit. Well have pictures soon.

Check out our youtube page for some vids of the front ends in action.

https://www.youtube.com/channel/UCMd1hXOKYTP5TC9KBB8169A

The Viper kit will be a 365 kit 36" wide and +5" forward from stock. Camber and castor is very close to 2015 stock but is adjustable. Its pretty stable considering its 36" wide. The kits is pretty much on par weight wise as the stock set up.
We didn't limit the design by using bent tie rods or having to install spherical bearings on our shocks or even buying new shocks. We have swivel mounts built into the kit.
Our kit utilizes the stock length of shock that is on the 38" wide sleds. If you have a 40" or wider you will need to get new shocks and tie rods, or modify your stock ones.
It really makes the sleds easier to get on edge, and a lot more fun to ride off trail.

Here are some picks