TTT.
I'm also going to be using the Wix 33300 (NAPA 3300) fuel filter in this setup as well.
It has a physically higher capacity filter element and is rated at 11 micron (perfect micron rating IMO) ... application is Ford/Lincoln/Mercury '92-98.... 5/16" inlet 3/8" outlet (cant get the in/out mixed up)
Once set up with the hoses and quick disconnects... filter changes would only cost about $15 and would be a common stocking part at your local auto parts store.
OR
Ebay vendors have them shipped to your door for less on the WIX 33300
A filter change would only take a couple of minutes and not require any disassembly of the sled if placed in the right location.
I like the quality and consistency of the Wix filters over other brands of filters in my experience.
NAPA 3300 is a re-boxed Wix filter (same)
other Cross #'s are
Motorcraft FG-881
Fram #G7596
PUROLATOR #F64728
AC DELCO GF749
Hastings GF261
.