Looking at doing a gear down kit for my AXYS and I have a few questions for those who have done it.
Kurts: 2.37:1 --> ~$600.
Pro Gears 2.1:1 --> ~$425-450 (Gears from eBay and new Belt from Polaris)
Not much difference in price, pretty big difference in ratios. I keep reading "lower the better". Kurts worth it price wise vs Pro gears?
Secondly, I plan on adding an SLP Pipe to the sled with this, I have the can already.
What should I do for clutching? I would like lower belt temps and better back shifting. Kurt's makes a kit, SLP has its clutching for the pipe.
Tempted to just drop it off at Carl's and tell them to do what they do.
EDIT:. 6K - 7.5K. typical elevation, ride alot in the tree's. Good base with fluff or DEEP and slightly heavy snow are typical conditions.
Kurts: 2.37:1 --> ~$600.
Pro Gears 2.1:1 --> ~$425-450 (Gears from eBay and new Belt from Polaris)
Not much difference in price, pretty big difference in ratios. I keep reading "lower the better". Kurts worth it price wise vs Pro gears?
Secondly, I plan on adding an SLP Pipe to the sled with this, I have the can already.
What should I do for clutching? I would like lower belt temps and better back shifting. Kurt's makes a kit, SLP has its clutching for the pipe.
Tempted to just drop it off at Carl's and tell them to do what they do.
EDIT:. 6K - 7.5K. typical elevation, ride alot in the tree's. Good base with fluff or DEEP and slightly heavy snow are typical conditions.
Last edited: