W
Curious what others are or are not seeing. 2019 Silber Alpha running 5 psi on two separate sleds and we are both lacking roughly 1/2" - 3/4" from being fully shifted out. Stock helix, aftermarket springs in both and weights loaded toe heavy to 78 & 80 grams. Both pulling 8400-8450 rpm.
We also have an 18 Cat with a can and MDS clutching that is fully shifted to the edge of the primary. Was there a change in the clutches or their geometry for 19 that could be an issue? We don't have a stock Alpha or other 19 Cat to compare against.
We also have an 18 Cat with a can and MDS clutching that is fully shifted to the edge of the primary. Was there a change in the clutches or their geometry for 19 that could be an issue? We don't have a stock Alpha or other 19 Cat to compare against.