• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

m7 won't start

Boostfreak

Well-known member
Lifetime Membership
Jan 24, 2002
369
65
28
Lander, Wyoming
Are you sure you have fuel all the way to the cylinder? Fairly common for injectors to stick especially if you pre mix your oil. Sitting for long time like over the summer can cause this. To fix tap on injectors but not too hard or can brake them. Good luck
 

aphoric

Well-known member
Lifetime Membership
Mar 18, 2011
185
58
28
Centennial, CO
Try unplugging your killswitch/TSS behind the pipe, might have an aluminum triangle plate covering it. Wires are purple, brown, black I think.
 

Rixster

Well-known member
Premium Member
Oct 20, 2005
3,781
651
113
47
Springville, UT
Pull the plugs and dump some fuel in each jug. She should fire on that for a few seconds. Maybe enough to get the system shocked back into working order.
 
J
Jan 15, 2010
1,443
1,003
113
Is it really cold where you are? I have had issues with injectors freezing in 05 M7. Run isopropyl in the gas and it is never a problem, but if I ever forgot and it was under 10F it would usually freeze. put it inside for the night or a heater under the hood...
 
Premium Features