D
2014 Ski-doo Summit XM 800 Etec 154" for sale
Sled has been very well cared for and has a TON of parts on it, take a look at the additions, this unit is ready to ride with a fresh belt(200km on it) and still has the remainder of the 4 years of warranty left.
RPM Carbon Kevlar Skidplate $750 CAD
Ice Age Rails Anodized Black $800 CAD
Grip and Rip braces(never bend a S or E module again) $200 CAD
CFR Boondocker Bars + ODI Grips $180 CAD
TSS can $300 CAD
Braced and Welded T-Motion Swingarm $40 CAD
Quick Clickers $45 CAD
One set of Mountain Addiction Rails $90 CAD
Rear seat bag $90 CAD
Shocks have fresh oil and nitrogen charge on them(2 rides) $200 CAD
Scratchers $75 CAD
Quick Disconnect Sway Bar $80 CAD
The sled has been maintained well and always taken care of, I never wanted to be stranded in the back country so I did the necessary work to keep it tip top. This 800 Etec ROCKS and will keep you going strong for years to go with only 1600KM on it(994 Miles) + Give you piece of mind with the remaining warranty.
I encourage you to research and add up all the additions,these pieces are not cheap and most of the sleds for sale on kijiji do not have them. The rails and skidplate especially, There is almost $3000 CAD in additional parts. The Carbon Kevlar skidplate covers the ENTIRE bottom(See pic) will keep you safe when you decided to use those threes for traction! Meanwhile you buddies will have their front coolers ripped off. Also the rails are the best and strongest you can buy so your protected on the back end as well!
Sled is located in EDSON ,AB at my brothers. I can meet at the Sweetgrass Port Of Entry on the Canadian side. also please look at my brother sled below (Clay911) and we can work out a great combo deal for me to bring them both to Sweetgrass.
$11,400 CAD thats only $8700 USD!!!
1-403-710-0 five 8 1
Sorry NO TRADES! Cash Talks only reason for selling is I bought a Timbersled.
Sled has been very well cared for and has a TON of parts on it, take a look at the additions, this unit is ready to ride with a fresh belt(200km on it) and still has the remainder of the 4 years of warranty left.
RPM Carbon Kevlar Skidplate $750 CAD
Ice Age Rails Anodized Black $800 CAD
Grip and Rip braces(never bend a S or E module again) $200 CAD
CFR Boondocker Bars + ODI Grips $180 CAD
TSS can $300 CAD
Braced and Welded T-Motion Swingarm $40 CAD
Quick Clickers $45 CAD
One set of Mountain Addiction Rails $90 CAD
Rear seat bag $90 CAD
Shocks have fresh oil and nitrogen charge on them(2 rides) $200 CAD
Scratchers $75 CAD
Quick Disconnect Sway Bar $80 CAD
The sled has been maintained well and always taken care of, I never wanted to be stranded in the back country so I did the necessary work to keep it tip top. This 800 Etec ROCKS and will keep you going strong for years to go with only 1600KM on it(994 Miles) + Give you piece of mind with the remaining warranty.
I encourage you to research and add up all the additions,these pieces are not cheap and most of the sleds for sale on kijiji do not have them. The rails and skidplate especially, There is almost $3000 CAD in additional parts. The Carbon Kevlar skidplate covers the ENTIRE bottom(See pic) will keep you safe when you decided to use those threes for traction! Meanwhile you buddies will have their front coolers ripped off. Also the rails are the best and strongest you can buy so your protected on the back end as well!
Sled is located in EDSON ,AB at my brothers. I can meet at the Sweetgrass Port Of Entry on the Canadian side. also please look at my brother sled below (Clay911) and we can work out a great combo deal for me to bring them both to Sweetgrass.
$11,400 CAD thats only $8700 USD!!!
1-403-710-0 five 8 1
Sorry NO TRADES! Cash Talks only reason for selling is I bought a Timbersled.
Last edited: