Wondering where I want to start. With the stock weights at 10-12K I like the 64g. Wondering where and how much guy are loading these weights at the base and tip. I have the 60g weights, so was thinking 3.1g allen in the base, and .75g in the tips
Anyone running Cutler weights on a 16 above 10K ft?
- Thread starter CO 2.0
- Start date
No just trying weights now. I need to try stock profile adjustable. Stock weights were working better in spring snow at 11k over mds.
I put in 3.1g at the base, and 1.98 at the tip. Little over 65g. Will start there.
IF your running SW 120 / 310 primary spring,,, I assume your also running the SW spring cup adapter AND the glide washer??
<script>window.post_1473461669475_2 = function(win,msg){ win.postMessage(msg,"*"); }</script><script>window.post_1473461671932_2 = function(win,msg){ win.postMessage(msg,"*"); }</script><script>window.post_1473461674252_9 = function(win,msg){ win.postMessage(msg,"*"); }</script><script>window.post_1473461677368_10 = function(win,msg){ win.postMessage(msg,"*"); }</script>
<script>window.post_1473461669475_2 = function(win,msg){ win.postMessage(msg,"*"); }</script><script>window.post_1473461671932_2 = function(win,msg){ win.postMessage(msg,"*"); }</script><script>window.post_1473461674252_9 = function(win,msg){ win.postMessage(msg,"*"); }</script><script>window.post_1473461677368_10 = function(win,msg){ win.postMessage(msg,"*"); }</script>
Yup
Did you end up sticking with this setup?
R
I'm am thinking of switching to these as well from mds, let us know what you think.
weigh them empty first one of mine was a half gram heavier, I loaded the heel with probably 3 grams using two screws locked togather seems to work well
I'd have to weight them again, but I changed them up. I have them loaded at the tip all the way to about 1/8" from the base of the threads.
Interesting, so that's probably a good 68 grams then. I guess you are running a pretty high finish rate spring too though. I'm going to try and run that 120/310 spring this weekend and go from there.
Similar threads
