1
Utah.....BUY/SELL/TRADE
- Thread starter hatchers
- Start date
H
hatchers
Well-known member
nope, its like KSL, but more sled related....
Freak - the CR450R is for a much younger crowd, not sure you can handle it
Want to trade:
Flawless running 05.5 RT1000 with CS twins and a 2 stage BOSS nitrous system and a whole bunch of other chit (100lbs lighter then stock)
For
a 2008 OR 2009
CPC M8T or M1000 Twisted turbo.
Straight across (seriously) NO STRINGS ATTACHED
MY RT could be yours that simple. If you choose to you can sweeten the deal with some $$cash$$.
IF you dont currently own a M8T or M1000T I will be willing to go to the dealer with you so you can purchase it and to make sure all the paper work is in my name.
DON'T MISS OUT ON THIS DEAL!!
dude where do I sign up!
Punched Running Boards
We punch holes in your stock running boards for $10.00 a hole. We have a 2"X3" rectangle and a 2" round. Both punches roll the edge of the hole so they are as strong or stronger than the stock boards. These work better than any of the inserts that you have to saw out your boards just to rivet the insert in, they are cheaper and you don't do any work.
We punch holes in your stock running boards for $10.00 a hole. We have a 2"X3" rectangle and a 2" round. Both punches roll the edge of the hole so they are as strong or stronger than the stock boards. These work better than any of the inserts that you have to saw out your boards just to rivet the insert in, they are cheaper and you don't do any work.
Last edited:
I am in the market for a low mileage DSM.
1) Gen II Simmons skis for Ski Doo
2) Gen I Simmons ski bottoms for Ski Doo (Yellow)
3) Two or three place drive on/off trailer.
4) Snowblower!
2) Gen I Simmons ski bottoms for Ski Doo (Yellow)
3) Two or three place drive on/off trailer.
4) Snowblower!
B
bradb1us
Member
I know somebody with a 1,500 mile GNX available (It's no DSM, but whatever).
Asking only $85,000. lol
You have pics of these??
Also I have a friend that is in need of some 08 M1000 or M8 153" rails (I guess if the M8's are the same, I assume they would be?)
He stabbed his rail through his track and rails and track are goners......
2004 Polaris 800 RMK Verticle Edge Rolling Chassis
Primary and Secondary clutches rebuilt by Tri City Polaris with one ride on them, 151" Series 5 2.5" Ported Track, RSI Scratchers, Good Hifax, Big Wheel Kit, Simmons Skis with new Skaggs (one ride), Xenon Headlights, SLP Air Horn Kit, Air Pucks, Gold Finger Left Handed Throttle, Walker Evans Rear Shock, CPI Twin Pipes & Extra Original Polaris Parts. This is everything you need, just add a motor. Looking to sell fast and will negotiate. $2,000, call me if you are interested: Gary, Cell 801-897-2570.
SOLD
Primary and Secondary clutches rebuilt by Tri City Polaris with one ride on them, 151" Series 5 2.5" Ported Track, RSI Scratchers, Good Hifax, Big Wheel Kit, Simmons Skis with new Skaggs (one ride), Xenon Headlights, SLP Air Horn Kit, Air Pucks, Gold Finger Left Handed Throttle, Walker Evans Rear Shock, CPI Twin Pipes & Extra Original Polaris Parts. This is everything you need, just add a motor. Looking to sell fast and will negotiate. $2,000, call me if you are interested: Gary, Cell 801-897-2570.
SOLD
Last edited:
08 m1000 450 miles stock pm and make offer orange 153, have can and a y pipe that is not installed that i would be willing to part with too great poss of throwing a p. claw on it for you
here you go
You have pics of these??
Also I have a friend that is in need of some 08 M1000 or M8 153" rails (I guess if the M8's are the same, I assume they would be?)
He stabbed his rail through his track and rails and track are goners......
Selling 200 RMK 800
2000 Polaris RMK 800
Twin Pipes
V-force reeds
Boost bottle
Big Wheel Kit
136" track
Handle Bar riser (4"?)
Aftermarket Blue hood w/ Cobra low profile windshield
Original black hood also included
Just serviced for this year with a new belt
Fast machine!
Asking $2400
I also have a 4x8 tilt tailer that I used to use for this sled. It has new plywood and paint. Selling for $300
$2500 for both
I recently upgraded sleds and I need to sell.
2000 Polaris RMK 800
Twin Pipes
V-force reeds
Boost bottle
Big Wheel Kit
136" track
Handle Bar riser (4"?)
Aftermarket Blue hood w/ Cobra low profile windshield
Original black hood also included
Just serviced for this year with a new belt
Fast machine!
Asking $2400
I also have a 4x8 tilt tailer that I used to use for this sled. It has new plywood and paint. Selling for $300
$2500 for both
I recently upgraded sleds and I need to sell.
Last edited:
1999 ford f-350 extended cab 4 door 6 speed manual interior is in awesome condition leveling kit 4" exhaust, superchips chip, bidy has a couple dings runs awesome
T
twsandrew
Well-known member
07 Turbo Apex
http://www.snowest.com/forum/showthread.php?t=108976
Willing to deal now due to the economy. It is just sitting as I have been riding the TNytro and TM1000 this year. Turbos are a bad disease. My loss is someone's gain
I have been on a lot of fast sleds and it is hard to beat a built motor apex at 20 plus lbs. Dead reliable at 340+ hp too. Can you say 100+mph track speeds up anything
http://www.snowest.com/forum/showthread.php?t=108976
Willing to deal now due to the economy. It is just sitting as I have been riding the TNytro and TM1000 this year. Turbos are a bad disease. My loss is someone's gain
I have been on a lot of fast sleds and it is hard to beat a built motor apex at 20 plus lbs. Dead reliable at 340+ hp too. Can you say 100+mph track speeds up anything
