01 mm clutching ????

T

transam455

Free Member

Nov 28, 2007

32

0

6

• Dec 14, 2007

• #1

we are going to ride at 8000 to 10000 elevation. it have bender pipes and green white green spring. the 2 setups that i have been told is 13.3 steel inside and 10.3 aluminum outside with 70 degrees in the secondary.

The second i was told that it was going to be to much. They said nothing inside and 10.3 aluminum outside. with 70 degrees in the secondary. Do either of these seem right?????
Thanks

 

C

cableguy

Member

Nov 26, 2007

259

16

18

Lake Country BC

• Dec 15, 2007

• #2

second choice is better, but try to find a dual angle helix, and a cat yellowspring,

 

L

Linc

Active member

Nov 17, 2002

843

43

28

Pemberton

www.visionms.ca

• Dec 15, 2007

• #3

It's really hard to give exact clutching specs for different areas,you can take the exact same machine and it will have to be clutched and jetted different from the interior to the coast.The Benders like to be spinning at 9K,they don't have much torque back up so you'll have to keep spot on.

 

T

transam455

Free Member

Nov 28, 2007

32

0

6

• Dec 16, 2007

• #4

Thanks for the help. i think im going to go with the second and if anything it should be easier to put weight in then take it out.