G
If anybody has any 700 cylinders in good condition i would be interested in them. I need two, but if you have one that would be a good start. You can contact me at rjpearson@mtech.edu. Thanks
In need of two '97 rmk 700 jugs
- Thread starter gomermt
- Start date
P
i dont have any jugs but you might wanna try ebay
Do some digging, I believe it is Hardass that often has jugs F/S. The '97 motor had the "220" cylinders, which are getting harder to find, so you may be in for a bit of a search. The newer "824" cylinders are easier to find and probably cheaper when you do find them. They will work on your motor as well, but the porting isn't quite as good. Curious, but did you have a major motor failure and end up with broken cylinders or just a burndown and you need the top end freshened? If it's the latter, maybe someone can help get you a better deal on replating.
I have newly replated ones for $200 exchange. PM or call (360)658-1288
I have on from a 99 RMK. You would have to check and see if that would work or not.
Similar threads
