P
hooking up a secound blow off valve on my trx, do i just tee off the line that goes to the existing one? do i have to calibrate it, its a turbosmart raceport 50mm, thanks
2nd blow off valve
- Thread starter powerstarved
- Start date
hooking up a secound blow off valve on my trx, do i just tee off the line that goes to the existing one? do i have to calibrate it, its a turbosmart raceport 50mm, thanks
T
I teed mine between the carbs
P
so you teed w a 3 way from between the carbs, out with a single line, teeing again w a 3way to each bov valve. WTF did i just say. Did you have to calibrate for spring pressure?
. Did you have to calibrate for spring pressure?
N
I am doing the same thing ,would like some adj. info as well.
B
Most of the blow off valves will need adjustment on spring pressure.There should be variety of spring pressure from manufacturer.When your sled is at idle the valve should be open and once you throttle it , the valve should close. Very light spring pressure.
H
Ok why do you need 2 BOV?s
T
It get rids of the flame out
B
x2
