Ski-Doo Mx Zx 600RS Pushes Handling, Power Envelope Further

News, Ski-Doo
Viewed 6632 time(s)

North Branch, MN - BRP has pushed the snowmobile racing envelope further with the introduction of the 2013 Ski-Doo MX Zx 600RS model. The sled features revised front suspension geometry with better handling in bumps and refined engine components to maximize power output in all conditions.

The Ski-Doo racing program saw huge success last year claiming the ISOC Snocross series championship, Eagle River World Championship in snocross, world famous Iron Dog cross country event and the gruelling Cains Quest race. That success was due mostly to the Ski-Doo MX Zx 600RS model using the REV-X chassis-the basis for all Ski-Doo trail snowmobiles. BRP continues to demonstrate the belief that racing production based sleds improves the consumer experience and using the demanding race environment as a development laboratory, is one of the best ways to validate designs.

"Our season last year was one to remember for sure" Sebastien Thibault, BRP's new racing manager, said. "But we don't rest on laurels and that's why you'll see so many changes to an already very successful race sled this year. The team worked very hard to bring out extra horsepower and create a better front end on the 2013 race sled that should keep us on the top (podium) step."

For the 2013 MX Zx 600RS model, one feature leading the charge to victory circle will be the new front suspension geometry including new top A-arms, taller ball joint and revised spindle and tie rods. The new geometry eliminates bump steer and keeps camber variation to a minimum as the suspension cycles through its travel. Racers will notice straighter tracking through the rough stuff and sharper turning in at the corners, letting them choose better, faster lines.

The rMotion Racing rear suspension will get a new center shock spring and refined shock valving for snocross applications. The front suspension also benefits from refined calibrations to match the new geometry and rear suspension.

The chassis has been further strengthened with new reinforced front suspension casting mounts and stronger Pyramidal frame members for the really extreme conditions of high flying professional snocross.

In 2012 the MX Zx 600RS received a new motor design, for 2013 that has been further developed to deliver better performance across the entire powerband. Component changes include a new cylinder with revised intake flange, new carbon fiber Vforce3 reeds, stronger pistons and a new freer flowing exhaust system. Cross-country racers will see and appreciate an immediate difference on the top end, while the snocross guys will benefit from a stronger pull on the holeshot and out of the corners.

Complimenting the engine updates is a gearing change to 21/49 that allows the clutches to better operate in their sweet spot and put the extra power to the track.

Recap of what's new:

Front Suspension

  • NEW upper A-arms
  • NEW upper A-Arm Ball joint
  • NEW shock calibration

rMotion Rear Suspension

  • NEW center shock spring
  • NEW shock calibrations


  • NEW reinforced Front Suspension Casting
  • NEW stronger Pyramidal Frame

600 RS Engine

  • NEW Cylinder
  • NEW Carbon Fiber Vforce3 Reeds
  • NEW Pistons
  • NEW Exhaust System

Drive Train

  • NEW 21/49 Gearing
  • NEW Clutch Calibration

Specs - MX Zx 600RS


Engine Rotax 600R

Engine details Liquid-cooled, V-Force3 cylinder reed

Cylinders 2

Displacement 594.4cc/36.3 in3

Bore 72 mm/2.8 in

Stroke 73 mm/2.9 in

Maximum engine speed 8500 rpm

Carburation 2 x Mikuni TMX-38 mm

Recommended fuel type Super unleaded

Minimum octane 92 pre-mix 33:1 ratio

Fuel tank 20 liters/5.3 gallons


Drive clutch type TRA 3 Light

Driven clutch type TEAM Industries TSS-04

Engagement 5700 RPM

Clutches center distance 258.7 mm/10.2 in

Small sprocket number of teeth 21

Large sprocket number of teeth 49

Drive sprocket number of teeth 8

Drive sprocket diameter 183 mm/7.2 in

Brake system Brembo hydraulic, Racing piston insulator, Racing pads, Racing disc

Dry Weight 195 kg/430 lb

Color choice



Vehicle overall length 2890 mm/113.8 in

Vehicle overall width 1217 mm/47.9 in

Vehicle overall height 1229 mm/48.4 in

Ski stance 1065 mm to 1108 mm/41.93 in. to 43.64 in.

Ski overall length 1066 mm/42 in

Ski width 145 mm/5.7 in

Track nominal width 381 mm/15 in

Track nominal length 3051 mm/120.1 in

Track profile height 44.5 mm/1.75 in


Front suspension REV-XP Racing version front suspension

Front shock KYB PRO 40R front shocks, high and low speed compression adjustable, rebound adjustable

Front suspension max. travel 242 mm/9.5 in

Rear suspension rMotion Racing

Center shock KYB Pro 40, high and low speed compression adjustable

Rear shock KYB Pro 40, high and low speed compression adjustable

Rear suspension max. travel 381 mm/15 in


Tachometer Standard

Windshield Low

Handlebar Riser block/Handlebar wind deflectors

Anti-slip running boards Racing type wider running board with anti-slip

Skis Pilot 5.7R single runner skis

Seating 600RS Special seat

Heated throttle lever Standard

Heated grips Standard

Speedometer Standard

For more information on Ski-Doo snowmobiles visit

  • Like what you read?

    Want to know when we have important news, updates or interviews?

  • Join our newsletter today!

    Sign Up

You Might Also Be Interested In...


Send to your friends!