D
Made a sled lift from plans I got off doo talk. posted everyhting (pics and plans) here: http://www.shopfloortalk.com/forums/showthread.php?t=17822
wish I would have added one inch in width to better clear a 16" track. So the PDF and DXF plans have the 1" added. I have around $100.00 into it. $42 for the jack and the rest in steel. I removed the crank handle and drilled a 1/2" drive deepwell impact socket secured it with a 1/4" bolt and run it up and down with air impact wrench.
and the dolly plans are here: http://www.shopfloortalk.com/forums/showthread.php?t=17814
Had the wheels and about $50 for steel. Travis
wish I would have added one inch in width to better clear a 16" track. So the PDF and DXF plans have the 1" added. I have around $100.00 into it. $42 for the jack and the rest in steel. I removed the crank handle and drilled a 1/2" drive deepwell impact socket secured it with a 1/4" bolt and run it up and down with air impact wrench.
and the dolly plans are here: http://www.shopfloortalk.com/forums/showthread.php?t=17814
Had the wheels and about $50 for steel. Travis
Last edited: