windsock Well-known member Lifetime Membership Premium Member Dec 3, 2007 179 195 43 Vail, CO www.ratzco.blogspot.com Feb 22, 2009 #1 I'm re-doing my top end M7, stock. Parts should be in on Monday. Anyone know the torque specifications for the cylinders and the head ? Or where I can find them? Much appreciated
I'm re-doing my top end M7, stock. Parts should be in on Monday. Anyone know the torque specifications for the cylinders and the head ? Or where I can find them? Much appreciated
H Hirevtuner ACCOUNT CLOSED Jan 14, 2008 469 196 43 Calgary Feb 22, 2009 #2 Not sure what the factory recommends but I use 24 foot pounds on the head and 45 on the cyl.
S samiams2 Well-known member Nov 14, 2009 1,341 524 113 MN...stupid poser flatlander Feb 13, 2010 #3 TORQUE SPECS FROM CAT I called the Cat dealer this morning and asked what the torque specs are on an 06 m7 and was told "13lbs-20lbs" I searched all over here last night at 2am trying to find this info.....hopefully everyone will get a lot more sleep now! Sam
TORQUE SPECS FROM CAT I called the Cat dealer this morning and asked what the torque specs are on an 06 m7 and was told "13lbs-20lbs" I searched all over here last night at 2am trying to find this info.....hopefully everyone will get a lot more sleep now! Sam
M mtn_extreme Well-known member Nov 11, 2002 1,692 88 48 Nampa, Idaho Feb 13, 2010 #4 Torque cylinder bolts to 27 ft/lbs and then final torque bolts to 32ft/lbs. Torque head @ 22ft/lbs. MX
Torque cylinder bolts to 27 ft/lbs and then final torque bolts to 32ft/lbs. Torque head @ 22ft/lbs. MX
Tonysnoo Well-known member Lifetime Membership Apr 6, 2004 978 277 63 No. Nevada Feb 14, 2010 #5 My cat manual shows the head bolts with the three marks on head of the bolt torqued at 13-20, the head bolts with the four marks are to be torqued to 23-26. The base bolts and base stud nuts are to be torqued to 29-44. Hope this helps and Good luck
My cat manual shows the head bolts with the three marks on head of the bolt torqued at 13-20, the head bolts with the four marks are to be torqued to 23-26. The base bolts and base stud nuts are to be torqued to 29-44. Hope this helps and Good luck