stock rx1 drivers?

[Wheel House Motorsports]

im just curious what size drivers would have come stock on an 03 RX1 mountain as i hooked the speedo sensor up on my RT and have 7 tooth 3" pitches so wanted to make a little conversion factor as the tiny little 7 toothers will read a bit high, i just want to know how much!

 

[roughrider99]

stock rx1 drivers were 7t 2.52 pitch

 

[Turbo Monster]

Wrong 8 tooth 2.52.Got a set in the shed

 

[M5-]

The 7 tooth 3's and the stock 03 8 tooth 2.52's are pretty close in diameter probably not enough difference to even worry about from a speedo point of view.

M5

 

[Wheel House Motorsports]

yeah, thats pretty dang close... only 5% difference.. so thats not to bad. i was used to 10 tooth 2.52 to the 7 toothers on my RT beforehand, that thing was WAY off..

im really stoked to have mutated the rx1 sender onto the DOO shaft, having a speedo is pretty dang useful in tuning!

 

[roughrider99]

Wrong 8 tooth 2.52.Got a set in the shed

thanks for the correction, i thought they were 7t's i guess i coulda just went to the shop and counted