BRP just shot this over to me suggesting I should post it for our members.
Ski-Doo Bulletin: Vibration Damping Clutch Technology
- Thread starter christopher
- Start date
Some additional info NOT from BRP directly..
Last edited:
M
MotorMike
Active member
Hopefully the guys that are running out to there machine shops to get the wobble corrected on the primary will read this thread first, although how come this technology that doo has makes all these belts blow so easy??
And now for 2018 they are putting a fan on the sheaves, they know they have a problem, come on DOO we are paying 14 grand for a sled, that's clutches are so hot you can cook a egg on, I don't get It!!
And now for 2018 they are putting a fan on the sheaves, they know they have a problem, come on DOO we are paying 14 grand for a sled, that's clutches are so hot you can cook a egg on, I don't get It!!
S
SidewaysInto3rd
Well-known member
ITS NOT APRIL 1 YET !!!
screenshots off a tablet ... second article in pdf form ...
suspect .. very suspect !!!!
where is the URL from the original post by skidoo ?
screenshots off a tablet ... second article in pdf form ...
suspect .. very suspect !!!!
where is the URL from the original post by skidoo ?
Last edited:
ITS NOT APRIL 1 YET !!!
screenshots off a tablet ... second article in pdf form ...
suspect .. very suspect !!!!
where is the URL from the original post by skidoo ?
Go to the online corporate bulletin page.
They released it 2 hours ago to delaers.
And seriously, do you REALLY THINK I would post something saying it came from BRP directly if it didn't.
REALLY??
M
MotorMike
Active member
Thanks for point that information.
Hopefully the changes Doo is making for the 2018s will help with the bels issues (new belt, new sheave, new clutch cover).
Hopefully the changes Doo is making for the 2018s will help with the bels issues (new belt, new sheave, new clutch cover).
I did notice a spelling error...hight !
Must be legit darn frenchies!
Lol
Sent from my iPhone using Tapatalk
Must be legit darn frenchies!
Lol
Sent from my iPhone using Tapatalk
S
SidewaysInto3rd
Well-known member
ITS NOT APRIL 1 YET !!!
screenshots off a tablet ... second article in pdf form ...
suspect .. very suspect !!!!
where is the URL from the original post by skidoo ?
Who the hell besides BRP would take the time to make all that jibberish up and make all those pictures?
I
Insaneboltrounder/sjohns
Well-known member
Well..... there goes the easy explaination of why there is belts blowing , now what?
I don't think you understand how this design works. As the engine moves towards and away from the secondary based on the firing order and natural imbalance of the engine, the clutch run out is properly aligned such that it neutralizes the effect of the engine movement. The premise here is that the belt tension remains more constant. There should be no fluctuation in RPM with this design. It's a cool idea.
They obviously still have a clutch heat issue. Most likely related to a calibration, airflow and alignment.
Do you know of any that did and it actually helped, or was it just your neighbor's brother's uncle that did it?
Think they use the 600RS pdrive vs the 850. If I remember correct there was a difference.
