Should i buy 2010 m8 with issuesÉ

[Ihaveadragon]

So here we go, im in Canada theres a 2010 m8 and the guy is saying 02 sensor is gone and the clutch side torque plate rubber mounts are gone as well. He wants 3k but i said 2500 max and i do the work. Any one have any tips or thoughts it would be muchly appreciated

 

[kiliki]

ebay this part number for the pipe probe and make your own ends 12643246
rubbers are easy to change if you have a press and don't forget the one on the can side but you will need to pull the clutches.

 

[jim]

With bad mounts come bad clutches. And 2500 is ok...depends on the miles. If mounts are shot, that might just be the beginning and make me question how it was stored.

 

[mbcat]

Doubt pto side are worn, the mag side is first to go & often.

 

[mbcat]

Oh & be sure the bulkhead isn't cracked in front of the diamond drive. The rear pto side mount bolts there & causes a crack

 

[Readymedic]

Personally, I would pass. Once you dig into it, it may get worse. If it doesn't get worse, you are still fixing, if you don't get in over your head..