• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Reverse stalls engine

S
Oct 15, 2019
5
1
3
I have a 2008 Polaris RMK 700 compression is at 120 on the nose both cylinders. I have else taken apart all connectors cleaned and applied dielectric grease to connectors. I'm at a loss as to why when I press the reverse button it stalls the motor. When I bought it last month I know for a fact it worked last year when I road with my buddy I bought it from. Thinking maybe just wait till the snow flies ride it like I should and see if it's still not engaging.
4798bc7b69b584eb8573c54343f77310.jpg


Sent from my HTC U11 using Tapatalk
 

retiredpop

Well-known member
Lifetime Membership
Jul 3, 2001
1,349
295
83
Calgary
If the engine is not warmed up enough that will cause it to stall when you hit the reverse button. The TPS adjustment could be off a bit as well. Idle rpm should be about 1700 rpm.
 
W
Dec 4, 2019
5
1
3
Thanks Guys...You helped me with one of my problems...Now my 2010 IQ 600 stalls out after 25-30 yards and flashes Service Engine 5 TIMES....! New to this sled
 

retiredpop

Well-known member
Lifetime Membership
Jul 3, 2001
1,349
295
83
Calgary
That indicates an exhaust temperature sensor problem.
 

Attachments

  • IQ diagnostic codes.pdf
    10 KB · Views: 5
Premium Features