post your gen 2's !!!!

[cbc24]

Since everyones posting there new machines heres mine: (not so new) 99 700 rmk , i baught it with a blown top end for low digits anyways heres the pics:

future plans are too rebuild the motor, put either a 3 inch riser and protaper rise bars or a 6 inch riser, snow stuff rumble pack, windsheild , vforce reeds, seat cover and the gripper rmk skis. what does a boost bottle do? and does it actually help? thanks clayton

 

[mckinney]

Riser

If you find a used 08 and up Nytro riser (Apex maybe the same) all you have to do is drill the mount on the Polaris out just a bit to get the nytro riser to fit. But the steering shaft will bend easier. Just did it on a 98? this last weekend. Not sure if you need longer cables.

McKinney

 

[Wolfrun]

This is a 200 700 RMK 159 with 6000 miles and has never been apart. We are both old but we still run with the big dogs.

 

[bannockrider]

http://snowest.com/forum/showthread.php?t=140688

my 2000 800 rmk 151"

 

[Kootenay-Stomper]

here my 2000 underway!! the 151 tunnel extension is on not in these pics though

 

[manowar]

Great looking sleds guys keep the pics comming

 

[Scott]

I've got a bunch of pic of mine.

Here are a couple:

 

[Dippy]

This is a 200 700 RMK 159 with 6000 miles and has never been apart. We are both old but we still run with the big dogs.

Hey wolfrun Do you have any motor work done? Cause I'm thinkin of putting a 159" series IV track on my 01 700.

 

[xc_rider08]

i believe a boost bottle is supposed to help synchronize the carbs so they are pulling the same amount of air into the motor... i have one on my sled. i guess i cant really tell the difference..

Since everyones posting there new machines heres mine: (not so new) 99 700 rmk , i baught it with a blown top end for low digits anyways heres the pics:

future plans are too rebuild the motor, put either a 3 inch riser and protaper rise bars or a 6 inch riser, snow stuff rumble pack, windsheild , vforce reeds, seat cover and the gripper rmk skis. what does a boost bottle do? and does it actually help? thanks clayton

 

[xc_rider08]

ok so here is my gen 2

99 xc 600 with 5200+ miles (speedo cable broke towards of end of seasonm didnt fix right away)

its has, billet head, delta v-force reeds, dynoport can, hot seat clutch kit, boost bottle,

this is what it looked like when i bought it, minus the 1.5" paddle track

this summer it has been in pieces and it still is right now...

extending it to a 141x15x2, simmons flex skis, delta v-force 3 reeds, handle bar riser, and some more...

some pics so far..

will post more pics when it is done

 

[Snow Duck]

sleds

01 and a 99 rmk not sure how to do this yet bare with me??? [/ATTACH]

 

[Wolfrun]

Hey wolfrun Do you have any motor work done? Cause I'm thinkin of putting a 159" series IV track on my 01 700.

The motor is all original and has more than enough horses to pull every thing.
actually the series 4 with all windows open and clipped rolls a lot easier than the old track, You will be more than pleased. Be sure to put new bearings on both ends of the drive shaft when it is apart. Fuel milage went up 4 miles to the gallon.

 

[2strokes_are_awesome]

That's my 00' 800 as it sits now. It'll have a different offset axle and a 2" lug track along with gearing changes for this next season.

 

[2001rmk700]

2001 rmk 700
extended to a 151
2 wheel 8 inch big wheel kit
7 tooth anti wracthet
153 camo
slp y pipe single and can
slp high flow air box
v force 3 reeds
team secondary
19 42 gears
boss seat
10 inch rsi risers
jack daniels hood
TRUCK NUTZ- gave me an extra 30hp

 

[bisonboy02]

Here is pics of the Gen2 mod. Lightweight with a Price Performance 1000 stroker motor. Too bad I sold it last winter.......

 

[Snorider]

 

[rmkboxer]

here is one I ride when I don't want to trash my dragon,:beer;

 

[instigator10]

here you go

 

[F-Bomb]

here is a sweet example of a Gen II with Better Boards

 

[xc_rider08]

so how much for those "sweet" better boards??? :beer;

need some sort of snow eliminators... just weighing out my options

here is a sweet example of a Gen II with Better Boards