N
Just wondering what kind of play there should be in the lower ball joints on a 08 nytro, mine seem pretty loose.
Nytro Ball Joints
- Thread starter nytrosucks
- Start date
Probably need to be replaced.
B
How hard are they to replace?
C
easiest done with A arm removed ... remove circlip on lower side and pop them out in a press and press new ones in .... had a set that wore through the top side (early bad design / material selection) and had to tack on a few wields so that there was something to press against ...
P
08 had bad balljoints, replace them before you can't turn the handlebars
