Help! I need center to center distance for Xtra-lite skid

[Boondocker-1]

I am in desperate need of the center to center distance for the skid mounting bolt holes on a 2000 RMK with the xtra-lite skid. If you have the measurement or can point me to someone who does it would be greatly appreciated.

Thanks

-BD1

 

[skis_n_skid]

I have a 2001 rmk xtra lite skid and the distance is 27 15/16.

 

[Boondocker-1]

Thanks

I have a 2001 rmk xtra lite skid and the distance is 27 15/16.

Would you happen to know the distance from the top of the tunnel to the mounting bolt for the front and the rear?

Thanks

 

[skis_n_skid]

The front mounting bolts are 4.75" from the top of the tunnel. For the rear I used stock 97 XLT SKS hangers mounted flush against the bottoms of the running boards. That's in a wedge chassis though with xtra 10 up front. A 2000 RMK is probably a little taller up front so the front mounts would probably need to be a little lower in the tunnel.

Have you checked the jbshocks site (link below)? The 136 xtra 10 mounting locations shown on this page should be be in the ball park.

http://jbshocks.com/x10mount136.jpg

 

[Boondocker-1]

Thanks

The front mounting bolts are 4.75" from the top of the tunnel. For the rear I used stock 97 XLT SKS hangers mounted flush against the bottoms of the running boards. That's in a wedge chassis though with xtra 10 up front. A 2000 RMK is probably a little taller up front so the front mounts would probably need to be a little lower in the tunnel.

Have you checked the jbshocks site (link below)? The 136 xtra 10 mounting locations shown on this page should be be in the ball park.

http://jbshocks.com/x10mount136.jpg

Thanks for your help. Now I can git er done!