Handwarmer/hi beam relay??

[Spaarky]

Anyone know which relay is the handwarmer/hi beam relay, before I start swapping?

Warmers went out last ride. I don’t see anything loose or un plugged. Only thing left really.

Thank you.

 

[powdersnobb]

You might check that stator wire plug in the wiring velcro bag. It gets fried on a lot of sleds causing this issue. I think 2016 was the most notorious for this.

 

[powdersnobb]

Check this recent thread out.

Axys Stator Connection Fix

During a top end rebuild I discovered the problem many have encountered of the stator connection being melted. This was on a 2016 Axys, and located in the Velcro bag above the motor on the PTO side (clutch side) Wanted a good fix,make it watertight and straight forward (goof proof) in the event...

www.snowest.com

 

[Spaarky]

That was the first thing I checked. Thanks though.

 

[Ultrasauras]

let us know what u find i have a 2017 with intermitted hand warmers also

 

[bryceraisanen]

I been struggling with erratic handwarmers for the last two seasons. Finally replaced the two relays right near the top of the left shock mount. Now all the warmers work, including the thumb warmer.