Bumpers on Khaso Matryx Slash

[mrooks17]

What bumpers are you all running? Likes/Dislikes? Leave factory?

 

[PSI 800]

I think the Backwoods bumpers seem to be the most popular from what I have seen and read. Most likely going to get 1 myself. FWIW If you plan on ever having to tow out a dead sled i dont think the stock 1 will hold up.

 

[damx]

Backwoods is holding up 100% on 6 matrix in the group, No problem towing broken selds out off the grab handle.

 

[Sheetmetalfab]

Backwoods is holding up 100% on 6 matrix in the group, No problem towing broken selds out off the grab handle.

Backwoods front and rear are bombproof and fit great.
I mangled the stock front on a sapling.

Replaced the rear after the first ride. (Also after seeing 6-8 bent tunnels with stock bumpers)

 

[damx]

2 guys I ride with are into the tricks, so there sleds get launched in the air alot each ride. And there tunnels are staying straight. I mount my gas can on the back. It comes off in 20 minutes from the truck, top up and keep the rest for the way down.

 

[RanOutofTalent]

I have been running BM Fabrications products for about 7-8 years and they have been exactly what i am looking for. They provide a ton of protection and support with little added weight.

I highly recommend them.


Sent from my iPhone using Tapatalk

 

[Wheel House Motorsports]

Ran a BM Fab last year as well. Definitely stuffed it into the dirt plenty of times as our snow was pretty sad most of the winter and everything held up great. I'd recommend a rear before anything especially on khaos boosts. You loop out really easily?

I'll be putting one on my 23 when it shows up

 

[nordicmike]

I can say that my Backwoods from Ryan have been amazing since his first run of bumpers on my old proride. Our whole group runs then and have had no issues.

 

[mrooks17]

Thanks guys. I ordered front and rear Backwoods bumpers today.

 

[DUDEE]

I have a rear BW for sale in black I'm in South Dakota for local pickup if needed

 

[User Name]

Do the after market bumpers still bend? I bend my stock bumper pretty often but it feels like it absorbs the right amount of energy. For under $100, I am happy to be replacing the bumper after a big f up

 

[Steep&DeepRider]

I got a T-Rex rear bumper and I love the fit and finish. Also will cheaper than the others and it got it within a day or two of ordering!!

Matryx Rear Bumpers

T-Rex Rear Bumpers for the Matryx Slash 155,163,165 and Non Slash 155 Features: Powdercoated black Aluminum construction .250" Side plates Grab bar overlaps side plates 11" for increased durability at end of tunnel Rivets included for installation Bumper Install Instructions: Click Here

www.trex-fab.com

Sent from my SM-S906U using Tapatalk