Bikeman Stage 1 POL 850 with Reflash dyno runs!

[joey@bmp]

On the Dyno with the Bikeman Stage 1 kit and with Bikeman Stage 1 reflash using Torque Link flash.

In the video you will notice that the stability of the HP as the engine and pipe warm up is drastically improved compared to running the kit without the stage 1 reflash.

Kit includes - Bikeman Fat Azz Pipe and Y-Pipe
Torque Link flash - Bikeman Stage 1

Fuel used 91 Octane

Here is the back to back sweep runs-


Here is the long WOT right after the sweep runs-

 

[prorideupper800]

Awesome Thanks

 

[hudini]

The stability is really impressive.

 

[Dizzle]

That is DAMN impressive!!

 

[dbrown279]

Good work Joey definitely good looking numbers I'm looking forward to seeing what you come up with for Stage 2.

 

[madmax]

Probably the longest sled dyno pull at wot ive ever send. Nice work, over 180 for quite a while!

 

[Havesledwilltravel]

Hopefully next year this will be a go to upgrade for my 850

 

[DITCHBANGER]

If you do the flash, will polaris void any warranty?

 

[live2beel]

What does the dyno run look like If you just do the y-pipe and pipe with stock 2020 programming?

 

[Hellsledder]

What does the dyno run look like If you just do the y-pipe and pipe with stock 2020 programming?

Polaris 850 Axys Stage 1 Horsepower on factory ECU programming compare 19, 19.5 and 20 flashes

 

[live2beel]

I want to see a one minute pull on stock programming,, not just a quick sweep.

 

[damx]

Watch all of Joey strub YouTube videos it's all there.

 

[live2beel]

I’ll check them out. I didn’t think it was with a y-pipe.

 

[joey@bmp]

I want to see a one minute pull on stock programming,, not just a quick sweep.

On stock 2020 the power fades pretty quick because there is not enough fuel for the ECU to allow full timing for long duration. Since it is leaner we did not want to hammer on it for an extended pull.