Bent bars

[wally1]

Tweaked the handlebars on my ‘21 down about 2 inches on one side. Any chance of straightening them or just order a new pair ?

 

[Sheetmetalfab]

Tweaked the handlebars on my ‘21 down about 2 inches on one side. Any chance of straightening them or just order a new pair ?

New.

Aluminum is severely weakened when you straighten it.

 

[wally1]

Thanks for the answer, I was afraid that might be the case.

 

[Sheetmetalfab]

Thanks for the answer, I was afraid that might be the case.

Probably break off in your hand. ?

 

[North Dakota 322]

I haven't looked into it any farther than this at the time of this post but, i believe my dealer stock came with the mid bars factory and i am over 6'8" tall and could really use the tall bars if you're interested in my mid bars.
No clue on the availability of the tall bars at the moment.

Off of a 200 mi 2021 Kahos

 

[North Dakota 322]

Well scratch that off, I see the grip heaters are NCA

 

[J270wsm]

I’ve seen guys bend bars a fair bit to get them back to straight ish, as long as they aren’t kinked. But they will bend again and it will be easier than the first time.