AXYS Tunnel Chop | CR Racing Cooler | CNC Bumper

[RC80AK]

Completed a 6" chop on my 2017 AXYS RMK last year with the CR racing cooler. My tunnel was a little wider than the cooler and it took a couple drilled rivets/clamps to pull everything in enough to get it inserted. Designed/built a CNC rear bumper and added it this year. Interesting note, the factory rivets don't line up left/right tunnel. I had milled relief holes to let the sides lay flat against the tunnel on the left side and was surprised to find completely different spacing on the right. I'm very happy with how the sled handles with the chop and offset spindles.

AXYS RMK — Craig Van Sickle

craigvansickle.com

 

[Spiderman]

Nice work...clean set up and turned out great!