Any ran a 156 x3 track on a 850 khaos

[ullose272]

Coming off an alpha the one thing i miss is the track compared to the 2.6, has anyone ran the x3 on a 850 khaos and how was it? Im afraid to make this thing want to wheelie more! Hah. If i wouldnt have cut my tunnel id probably look at a 162 to be honest

Sent from my SM-G973U using Tapatalk

 

[rydningen]

Have the X3 on my 2016 800, and the X2.7 on my 850 155, get the 2.7

 

[Wheel House Motorsports]

Ive run the X3 as well as Cat 3" track on 800 and 850 rmk and khaos sleds. IMO worlds better for a more aggressive rider. It will trench a little more and wheelie more on a khaos as its actually digging instead of just floating you on top like the 2.6 does. That being said a little shock tuning andy ou will be blown away by how much more capable the sled is in the deep. MAx out the low speed compression on the RTS to help control tthe transfer more.

 

[Sheetmetalfab]

Have the X3 on my 2016 800, and the X2.7 on my 850 155, get the 2.7

I can’t find an x2.7 anywhere.

 

[rydningen]

I can’t find an x2.7 anywhere.

Bought mine at Tracks USA, I think it was a cut down X3 that they got rid of when Camoplast became Camso.

 

[Sheetmetalfab]

Bought mine at Tracks USA, I think it was a cut down X3 that they got rid of when Camoplast became Camso.

I think they had a molding defect and cut tips off a batch of them.

I’m finding zero signs of them anywhere.

 

[summ8rmk]

I think they had a molding defect and cut tips off a batch of them.

I’m finding zero signs of them anywhere.

Challenger X 2.7"

For those of you looking for a little shorter version of the Challenger X3, we have a limited number of 156" and 162" Challenger X 2.7 tracks. These are the X3 trimmed to 2.7" lug height by Camso. When these are gone, we will be trimming in house for those of you who want for a little more...

www.snowest.com

Sent it

 

[Clarke673]

i have a 153 x 3 x 3 pc 3" currently missing 2 1/2 paddles but im sure it will be more after a few days from now. and it has a few CTX # 15 21/2 construction cert deck lag bolts for track screws. Would trade it for almost any newer 2.5" 15 or 16 wide 3 pitch 154, or 156 track. plus some boot either way depending on the track for trade.

 

[ullose272]

Well i put on a 156 x3 and my first ride, vast improvement over the 2.6 imo, the snow was better than most my previous rides so we will see how it goes but so far i like it

Sent from my SM-G973U using Tapatalk

 

[Uncle si]

Run the 162 or 174 if you want!

 

[ullose272]

Run the 162 or 174 if you want!

Ya i thought hard about a 162, i allready cut about 6" off my tunnel and it runs hot with the 156x3 and no flap, with a 162 i think it would be worse

Sent from my SM-G973U using Tapatalk

 

[Sheetmetalfab]

Ya i thought hard about a 162, i allready cut about 6" off my tunnel and it runs hot with the 156x3 and no flap, with a 162 i think it would be worse

Sent from my SM-G973U using Tapatalk

Mtntk 3’ cooler and a 162.

100%

 

[ullose272]

Mtntk 3’ cooler and a 162.

100%

I have the 5 ft cooler but not using the stock cooling system, its fine in the fluff, but any trail riding it warms up pretty quick with scratchers and no flap

Sent from my SM-G973U using Tapatalk

 

[Sheetmetalfab]

I have the 5 ft cooler but not using the stock cooling system, its fine in the fluff, but any trail riding it warms up pretty quick with scratchers and no flap

Sent from my SM-G973U using Tapatalk

Ah.
I suppose with both it would stay cool.

 

[ullose272]

Ah.
I suppose with both it would stay cool.

Ya, i may just get it welded up of the summer and run both.

Sent from my SM-G973U using Tapatalk