• I've received emails and PM's asking me about "Group Buys" and promotions.

    A Group Buy here on SnoWestOnline.com would be a situation where a normal member (non vendor or mfg) personally collects orders from other members. That member then uses those orders to negotiate a better price with the Vendor/Mfg for HIS/HER "Group" of buyers.

    Here is an example of a viable "Group Buy"

    http://www.snowestonline.com/forum/showthread.php?t=269222

    A promotion that has the words "Group Buy" in the title is still a promotion, and from the rules that were handed down to me by Harris Publications is that non-advertisers cannot run promotions or open sales programs on the forums outside of the swapmeet.

    If a members wants to become a group buy manager, maintain a thread and collect the funds and negotiate a group buy... as a member, you are welcome to do that as long as you are not attached to the business of the vendor or Mfg.

    If you are a vendor/MFG and you want to offer an EXCLUSIVE "SnoWestOnline ONLY" promotion that is exclusive to snowest readers, please contact me and you'll be able to put it up in the Polaris forums.

    Also, before any vendors/mfgs get all "riled up" over this know that the moderators are strictly volunteers and do not receive a dime from any advertising $$ spent on this site.

    As ALWAYS, since DAY ONE of me becoming a moderator, I have pioneered, supported and encouraged vendors and mfgs in getting the word out to our readers with "New Product Announcements.

    Have a great season.

    From this point on, all vendors/mfg's promoting Pre-Season tiered sales programs, in the Polaris Forums, that are not paid advertisers will be appropriately moved to the swapmeet section of the forums.

    MH

99' extention

Sep 16, 2009
2
1
3
I have a 99' RMK 700 136"X1.75". How hard is it to extend to a 151"X 2.0"? I was told that there might not be enough clearance in the tunnel to go to the longer cleats. Also will the 700 have enough power to handle the added track? Sure runs great now but not enough track to handle the deeper snow where my buddies what to take me. Any advice about this would sure help. Thanks
 
Jun 15, 2009
2,866
97
48
Marshfield, WI.
If its a rmk it should have 8 tooth drivers and a 2" will work great . As for going to 151" track you will need rail extentions . Not hard at all just google rail extention and pick a company you like to buy from. The 700 has plenty power for the 151"x2"
 

rmkboxer

Well-known member
Lifetime Membership
Nov 26, 2007
2,598
323
83
43
Bonney lake WA
you have plenty of room, make sure you get the tunnel extension for the 97-99 not the gen2 extension for the 00-01. I would geat it down to 19/41. great combo and it will be a great sled
 
Oct 17, 2008
194
23
18
Anchorage, Alaska
I put that exact track on the same sled last year. Worked out well. Performs much better.
PC120083.jpg
 

xrated

Well-known member
Lifetime Membership
Jul 20, 2004
8,870
1,018
113
37
Plainview, MN
as long as it's not an XC you will be fine for clearance. I'm currently doing a 121 to 136 to 151 swap myself and by my measurements there was clearance in the front for a 2" even with 9 tooth. Only close spot is with the tunnel coolers.
 

U turn

Banned
Nov 27, 2007
482
46
28
Ardrossan, AB
Lots of room. I would run it a while with stock gearing. I ran stock all the way down to 18/41, and I liked stock the best with the 151". Next best mod for that sled is a cat roller secondary, straight 51 helix and cat yellow spring.
 
I am doing the same thing with a Tracks USA (Canadian distributer) extension kit. So far it is working out fine. Only advise is to make sure you are getting the right tunnel extension. I have just sent back the second wrong extension. Sent me the POL-136 when I need the POL-151.:beer;:beer;
 

vinpie1

Member
Lifetime Membership
Feb 19, 2009
441
21
18
Gunnison, Co
I have 9 tooth drivers on my 1999 rmk. Do the sleds that come with 1.75" paddles come with these? I am going to try and put a 144 x 2.125" series iv on it next week. I hope there is enough room.
 

RMK4life

Member
Lifetime Membership
Nov 27, 2007
256
15
18
33
As long as its not an RMK you should be fine. I did it to my '99 a couple years ago and it works great. If youre really not sure go to a dealer in your area if you have one and just ask them.
 
Premium Features