98 Mountain Max with a AC 162 Skid

[Rock Valley Rider]

To all you modders out there,

Is is possible to fit a 162 skid from AC under a 98 MM 700?

I know I will have to do a drop and roll to make the track fit.

Let me know what the possibilties would be!!

 

[Rock Valley Rider]

Correction

Will any artic cat skids work on this sled? Wether it be a 141 up to 162?

 

[TRIPLESWILLNEVERDIE!]

A 151 1M skid or 153 M series skid will work. The Cat 162 rails might be too long.
For example i've got a 151 1M skid with 162 track with no rail extensions on mine with 8 tooth 3" pitch drivers.
Have seen quite a few 153 M series skids in MM's over the years too.

 

[studhorsie]

I put the 162 M7 skid on my srx with 7 tooth 3" drivers. I had to move the skid back after the first install. with bigger drivers I don't think it would fit without trimming the rails. I'd put in a 153 if I was to do it again. SH

 

[diggler]

buddy of mine took a 141 M skid and set it back a little bit to accomadate a 151.

 

[arcticmtn]

i have a 2011 timbersled 162 with ice age rails on a 97 nmountain max it works amazing! u dnt have to drop the chaincase but u have to make new mounts front and rear. the front mount is about an inch frward and half inch up. the back mounts u can use the forward hole. u have to gear it down and get a track with 2 and quater paddles. by far the best mod ive done. it took 60lbs outta the rear

 

[redneckracer76]

162

i have a 97 mm and put a 162 fabcraft tip up tunnel and 162 ac suspension in mine i droped the chain case 2" and rolled back 2" it works great dont have any clearance problems best mod i ever did ran hartman set up with 151 for three years and worked good ran with 162 last year and was running with modified ac 800

 

[BlackTRIPLE700]

i have a 2011 timbersled 162 with ice age rails on a 97 nmountain max it works amazing! u dnt have to drop the chaincase but u have to make new mounts front and rear. the front mount is about an inch frward and half inch up. the back mounts u can use the forward hole. u have to gear it down and get a track with 2 and quater paddles. by far the best mod ive done. it took 60lbs outta the rear
View attachment 170046

Do you have any more pictures or info …… I’m gonna give this a try