• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

872 jetting

mx100

Active member
Lifetime Membership
Jun 16, 2010
234
29
28
Livingston, MT.
Just wondering if you guys are following Dave's recommendation on Jetting, or if you have tried anything richer/leaner? Riding at 5-8500' elevation. Still running the recommended break in jetting with only 115 miles on it. Just wondering what you guys are running? Only good 872 info please, no sarcasm or bashing anyone.
 
S

sdstroker

New member
Nov 17, 2013
58
2
8
I would follow Daves instructions. Its a brand new tight engine that needs to be broken in with throttle burps and heat cycles. After a couple tanks I would start checking piston wash and spark plug readings. Then lean it up if need be.
 
T

tukernater

Well-known member
Nov 4, 2009
897
266
63
54
BC
Just wondering if you guys are following Dave's recommendation on Jetting, or if you have tried anything richer/leaner? Riding at 5-8500' elevation. Still running the recommended break in jetting with only 115 miles on it. Just wondering what you guys are running? Only good 872 info please, no sarcasm or bashing anyone.
What heads are you running IE 1349's 1350's ?
 
S

sdstroker

New member
Nov 17, 2013
58
2
8
I have a 14:1 head and it loves race gas at 8k+. Bad is its hard to check wash. Burns super clean. I run 560/580

Sent from my SCH-I535 using Tapatalk
 
Premium Features