X
Guys,
Bought a used Silber turbo with Redline G2 controller for my 800ETEC Summit.
Got everything installed no problem but not reading/building any boost according to the gauge. I did not get any instructions with this kit so I’m hoping someone on here is running a similar setup. I am getting flashing light on controller so I know there is power there.
Currently have things routed this way. Hoping I just missed a step or have something backwards with the lines
1- line from clutch side throttle body port to gauge(by itself)
2- line from exhaust side throttle body port T to G2 controller
3- line from exhaust side throttle body port T to BOV
4- line from wastegate to Boost Tee to front side of turbo port
5- line from wastegate to atmosphere
Bought a used Silber turbo with Redline G2 controller for my 800ETEC Summit.
Got everything installed no problem but not reading/building any boost according to the gauge. I did not get any instructions with this kit so I’m hoping someone on here is running a similar setup. I am getting flashing light on controller so I know there is power there.
Currently have things routed this way. Hoping I just missed a step or have something backwards with the lines
1- line from clutch side throttle body port to gauge(by itself)
2- line from exhaust side throttle body port T to G2 controller
3- line from exhaust side throttle body port T to BOV
4- line from wastegate to Boost Tee to front side of turbo port
5- line from wastegate to atmosphere
