Wondering how tight to set the front shocks?. Dealer has them set at 58mm from from bottom pre load ring to the last thread on clicker 2 setting. I’m 210 rtr and the shocks feel way to soft right now
I’m curious on this too. I’m running the Elevate kit on my Hardcore. Iceage recommends shock settings for the air shocks, but not the coil overs. Also a side note - the ski shocks are incredibly difficult to adjust with the Elevate spindles (the nuts sit right behind the top A arm). Not sure if it’s that way with the stock spindles as well or not...
