2015 Summit T3 174 SHR 880

[hobbes]

2015 Summit T3 174 SHR 880 PRICE DROP

Sled has @750 miles on it and I did the big bore just this year and it has @500 miles. Sled is a straight razor blade in the trees. No paneling, no huge counter steering to make it sidehill. This sled is turn key and ready to ride. There is no tuning necessary, it runs like a stocker with a ton more throttle response and gobs more power. I have been running it on straight 91 non ethanol at anything above 7500 feet. The suspension is dialed and rides great down whooped out trail as well as sticking to a sidehill through old trenches. I absolutely love this sled, there is no way a 17 G4 would even come close to performing like this one. I have well over $24,000 into this sled in just parts alone... $11,750

The sled is located in SE ND but is willing to travel...

2015 Ski Doo T3 174 X model
SHR 880 stage 2 big bore 180+ hp
SHR TRA lightweight race clutch, balanced, oilite bushing spring cup
SHR 880 mountain clutching
Shockwave secondary
Ceramic coated pipe and y-pipe
HPS can
Camso 174X15X3.2 track
TKI belt drive
Tom's EMotion R/R Kashima rear suspension
Billet T-Motion bracket with Skinz bushings
Iceage Performance billet anodized rails
Tom's Evol R ski shocks
Slydog 8" Powder Hound skis
Skinz Rasmussen narrow tube boards
Skinz narrow side panels
Skinz lightweight hood
Rigid LED headlight
Skinz post forward steering post
Skinz Rasmussen front bumper
Racewerx rear bumper
WRP Rasmussen low rise seat
ODI sticky grips
Ice Storm Scratchers

 

[Sheetmetalfab]

What happened to the tunnel?

 

[hobbes]

Ratchet strapped the stock rear bumper down when I shouldn't have, pretty common on the 174's. Installed the Racewerx rear bumper this year along with how the Skinz boards attach to the tunnel it's way sturdier. Thanks for pointing that out.

 

[snow-doo]

Stock seat from 174

Do you still have the stock seat? if you do do you want to sell it?
Please let me know
Thanks
Dick 805-441-0761

 

[hobbes]

Top, new price, any offers??

 

[SledGuru]

Trade ya a impulse turbo

307 SNOW MOTO
Dangle This

 

[soft hat]

Where is sled?

 

[hobbes]

Few nibbles now, with that price I'm surprised it's not gone! The sled is located in SE ND but I'm all over the place all the time so it's willing to travel. Sorry Hoss, I'm not looking for trades at this time... MIGHT be interested in the right side by side though.

 

[hobbes]

TTT

 

[hobbes]

Let's try one more price drop before I just keep it! Let's go over the build prices while we are at it...

2015 Ski Doo T3 174 X model (13,000)
SHR 880 stage 2 big bore 180+ hp (2295)
SHR TRA lightweight race clutch, balanced, oilite bushing spring cup (300)
SHR 880 mountain clutching
Shockwave secondary (300)
Ceramic coated pipe and y-pipe (250)
HPS can (350)
Camso 174X15X3.2 track (1000)
TKI belt drive (850)
Tom's EMotion R/R Kashima rear suspension (1695)
Billet T-Motion bracket with Skinz bushings (350)
Iceage Performance billet anodized rails (400)
Tom's Evol R ski shocks (950)
Slydog 8" Powder Hound skis (550)
Skinz Rasmussen narrow tube boards (550)
Skinz narrow side panels (350)
Skinz lightweight hood (350)
Rigid LED headlight (150)
Skinz post forward steering post (250)
Skinz Rasmussen front bumper (200)
Racewerx rear bumper (250)
WRP Rasmussen low rise seat (350)
ODI sticky grips (60)
Ice Storm Scratchers (100)

I'm guessing on a few of those items because it's entirely too painful to go back and actually look them up but I think you get the idea!

Total build cost PARTS ONLY $24,900

Last price drop $11,750

I should have my head examined...

 

[Nytroty]

Such a cool sled! And a great Deal! Wish it was a 163....

 

[SledGuru]

Super sick sled wish I had room for another one of hobbes builds in my garage, I have one of his sleds and it's everything he says they are and runs perfect

307 SNOW MOTO
Dangle This

 

[summ8rmk]

Thats looks like the perfect doo, how they should come from the factory.
Smokin deal for sure.

GS6

 

[Idaho Slim]

Let's try one more price drop before I just keep it! Let's go over the build prices while we are at it...

2015 Ski Doo T3 174 X model (13,000)
SHR 880 stage 2 big bore 180+ hp (2295)
SHR TRA lightweight race clutch, balanced, oilite bushing spring cup (300)
SHR 880 mountain clutching
Shockwave secondary (300)
Ceramic coated pipe and y-pipe (250)
HPS can (350)
Camso 174X15X3.2 track (1000)
TKI belt drive (850)
Tom's EMotion R/R Kashima rear suspension (1695)
Billet T-Motion bracket with Skinz bushings (350)
Iceage Performance billet anodized rails (400)
Tom's Evol R ski shocks (950)
Slydog 8" Powder Hound skis (550)
Skinz Rasmussen narrow tube boards (550)
Skinz narrow side panels (350)
Skinz lightweight hood (350)
Rigid LED headlight (150)
Skinz post forward steering post (250)
Skinz Rasmussen front bumper (200)
Racewerx rear bumper (250)
WRP Rasmussen low rise seat (350)
ODI sticky grips (60)
Ice Storm Scratchers (100)

I'm guessing on a few of those items because it's entirely too painful to go back and actually look them up but I think you get the idea!

Total build cost PARTS ONLY $24,900

Last price drop $11,750

I should have my head examined...

PEOPLE ............ HELLO !!!!

 

[Snowmow]

PEOPLE ............ HELLO !!!!

Gunna be a hard sell with the new ones coming. Would have been a great price on a great sled 6 months ago. But now, not so much. Someone would rather have "brand new" and pay more. Obviously.

 

[hobbes]

This sled will destroy the new 850, and is just as narrow. Not a great time to sell any sled, I'll try again in the fall.

 

[Snowmow]

This sled will destroy the new 850, and is just as narrow. Not a great time to sell any sled, I'll try again in the fall.

Good early forecast for this coming season!
Prolly sell fast In another 4 months.