J
I posted a while back about installing a camso x3 on my sled.....since then I can’t maintain full rpm. On the trail my sled will hit 8400 but in deep powder it will peak at 8000-8250 then drop down to 7900-8000. Sometimes it will even drop to 7600rpm. When i was in mccall I swapped my 64g weights for 62g to see if it was an elevation issue.....didn’t help.
I had my sled at the dealer yesterday and had the tps re calibrated and a relearn on the exhaust valves. New plugs were installed the night before I took the sled to the dealer.
I’m going to change out the clutch springs and see if it helps........
Any advice/suggestions would be greatly appreciated.
I had my sled at the dealer yesterday and had the tps re calibrated and a relearn on the exhaust valves. New plugs were installed the night before I took the sled to the dealer.
I’m going to change out the clutch springs and see if it helps........
Any advice/suggestions would be greatly appreciated.