14 RMK 600 Won’t Start

[MNFlatlander20]

After sitting in storage for two years my 14 RMK 600 will not start. During initial pull, engine reved up and died. Opened air box and found a mouse nest. Sucked everything out and blew air through entire motor...free flowed. Got spark, got gas (replaced with new). Did everything trick to clear flooded motor but each time I pull the cord on fresh plugs it wants to start but nothing, then I pulled the plugs and they are soaked. Not sure what I’m over looking so I’m going to let the motor breathe over night with plugs pulled and throttle open.

Does everyone have any ideas how to get it started? Figured once it started any lingering mouse nest will burn through.

 

[stum1967]

Is it possible some of the mouse nest made it thru to the reeds and is holding them open?

 

[NapaMatt]

yep ur reeds are open!!

if you hold the gas about 1/4 to 1/2 throttle she will start with new plugs..

if it was mine, id tear them out.. get the **** out first !!