'14 boards on an IQ tonight

[TRS]

For you PRO guys with an IQ for the wife and Burandt Boards installed on your sled. You can make her happy. Probably should have put this in the IQ forum. They fit the chassis pretty easily.

 

[wellfed777]

thats funny i thought someone could do that mod

 

[Spaarky]

Very ironic you posted this today. I was chatting with a buddy about this today. If this would be more affective then my better boards? The thing that is even more odd, he just talked to you.

Very nice work!!!!! So those are stock boards and not Burandts? Sorry I am still in the IQ Stone Age.

 

[TRS]

Very ironic you posted this today. I was chatting with a buddy about this today. If this would be more affective then my better boards? The thing that is even more odd, he just talked to you.

Very nice work!!!!! So those are stock boards and not Burandts? Sorry I am still in the IQ Stone Age.

Small world for sure.
Thanks. These are the stock boards, they came off a '14 when the Burandts were installed.

 

[mountainhorse]

Nice Work!!!

Any bending or drilling of the front bracket on the boards...Details on the "adapter"??

Could you post pics of the drop brackets from diff angles?






.

 

[shelbwyo]

Very cool! More pictures please

 

[TRS]

Nice Work!!!

Any bending or drilling of the front bracket on the boards...Details on the "adapter"??

Could you post pics of the drop brackets from diff angles?






.

No modifications to the stock '14 boards, all the rivet holes are used.
The "adapter" is from .750" x .065" tubing, flattened 90* from each other on the press. Need to remove the lower hole on the IQ steering hoop tunnel support for adapter clearance. The rest is if you installed them on a 2012.
Edit: forgot to mention the shim behind the rear support for cooler clearance.

 

[sledneck_03]

you should make a "fit kit" and start selling them on here for guys un able to fabricate that front mount and rear spacer.

 

[ripalip2]

you should make a "fit kit" and start selling them on here for guys un able to fabricate that front mount and rear spacer.

i would be interested if someone made a fit kit. i think those boards look good on the IQ

 

[vwsprite]

thanks for posting this, i bought some rails to do my 09 about 2 months ago, am going to wait till this summer to do it. have enough on my plate with the new motor

 

[TRS]

Sent this on to a contact at PI. Hopefully they will add the two small pieces of hardware to their Barandt Board kits.

 

[ripalip2]

trs, did you use the( lords) and bond the boards to the tunnel plus rivets or just rivet it ?

 

[TRS]

trs, did you use the( lords) and bond the boards to the tunnel plus rivets or just rivet it ?

Only the rivets. We have not used lords on the 2011-2012 also.

 

[TRS]

Had a PM about this, so back to the top.

 

[NapaMatt]

Dang.. SWeet!!!

Now.. only if coolant went down the tubes... the switch back and 900 guys Would be set right up!!

Any one have any idea's to allow coolant to pass down the outer edge tube..

 

[TRS]

TTT