07 apex

[rockey13]

Has anybody came up with the instrument bracket

Reason why because I like to end up rolling my sled and the headlight housing in crap plastic always breaks break so I tossed it I am putting a piece of aluminum on top of the bracket that holds the headlights on the snowmobile but it's it's so low that it's hard to see what's going on
I sure would you like any help here would be greatly appreciated if there's any aftermarket alternatives they make real nice bracket for the nitro for the spacer I like to find one that will work for the apex

 

[Shattered1]

I moved mine up to the handlebars. I made my own mount aluminum flat bar, sheet and riser adapters. I'll get a picture of what I did and post it later.

Skinz makes this one, but I know I've seen other manufacturers that do as well.

http://www.skinzprotectivegear.com/snowmobileproducts/speedorelocationbracket.html

 

[rockey13]

apex

How to get to wiring to reach did you splice it.

 

[rockey13]

I found the picture of the sled I really like the hood can I get any help where he got it from or if anyone can build anything like it for me.

 

[relentless rider]

I made that bracket out of a stop sign .hood is a diamond S

 

[Shattered1]

How to get to wiring to reach did you splice it.

No, I took the wiring harness apart and re-routed it. I thought about moving my headlights to the handlebars as well and I could have avoided taking the wiring harness apart then, but thought it may be more of a headache than it was worth.

Sorry I didn't get any pictures of what I have. I went out to take some pictures an realized that it wasn't on there. I think it's buried in my truck. I need to find it soon or ride without it because we should be able to hit the hills in a month or so.

Here's the best picture I could find of it. Sorry it doesn't show a lot of detail, but it shows where it's located.