• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

1993 phazer St

Turblue

Well-known member
Lifetime Membership
Jun 11, 2004
1,022
406
83
Alberta
Looking for clutching charts...also any good plastic skis that fit this sled? Any links to service manuals?
 
S
Sep 2, 2008
172
33
28
40
Bozeman, MT
I hat one that I put the plastic skis off of a '98 Polaris RMK on and they worked well. If I remem correctly, I had to trim the rubber pads a little. I trimmed them evenly and if I were to do it again, I would have trimmed more from the front of the pad than the rear because the skis tended to want to point down at the tips when in the air. It was never a problem, but it bugged me.
 

retiredpop

Well-known member
Lifetime Membership
Jul 3, 2001
1,349
295
83
Calgary
Here is a bit of info for you. I ran secondary in B-2 with standard Pink secondary spring and Pink-Blue-Pink primary with 89F weights if I recall with no rivet. 16-35 gearing. Definitely use the 39 degree helix which should be stock. I also ran an Aaen pipe which really worked well on this sled.
I also put on Polaris plastic skis. As mentioned you need to experiment with the rubber pads to get them right but fairly simple to do that. Also you may have to add some washers for the mounting bolt to fit tight. It is well worth the time to put plastic skis on them.
 
Last edited:
M
Jan 14, 2004
3,078
1,390
113
I have a set of Mods skis here for a Yamaha MM/SRX/RX1. I'm not sure if they could be made to work but I always liked those skis on my other Yamahas.

M5
 
B

BigFish BC

Well-known member
Jan 27, 2005
3,348
1,139
113
kitimat b.c
i will give you my ones off my viper if you pay shipping not a mile on them:face-icon-small-hap,building new sled for your kids?
 

Turblue

Well-known member
Lifetime Membership
Jun 11, 2004
1,022
406
83
Alberta
i will give you my ones off my viper if you pay shipping not a mile on them:face-icon-small-hap,building new sled for your kids?

Yeah finished the snosport for my daughter And got a phazer with 1600miles for my son. Yeah if you have them skis I'll take them. I'll give you some cash for them though.
image_zps33bd44b6.jpg

image_zps9b4a5217.jpg

image_zps3b5b7bf5.jpg

image_zps44e72cd9.jpg

image_zps421cf49f.jpg
 
Last edited:

Escmanaze

Well-known member
Lifetime Membership
Dec 8, 2007
811
564
93
USA
Oh my goodness where in the world did you come across a phazer that clean? That's a dream!!!
 

mckinney

Member
Lifetime Membership
Dec 2, 2007
161
20
18
48
Evans, Co
Man those running boards look good. I have 2 84's that need running boards like that. Can I get more pics and info?


mckinney
 

Turblue

Well-known member
Lifetime Membership
Jun 11, 2004
1,022
406
83
Alberta
Anyone familiar with clutching and a longer track. It needs a higher endgament to me. So here's what it's got.
Primary
89f with steel rivet
b-P-b spring
stock rollers

secondary
helix 88r01 set b2
think red white spring.

Gearing stock
went to 7t drivers.


so from what I can find I need alum rivets or no rivets the weights. Possible b-w-b and a pink sec set at c2.
 
Premium Features